ECONOMY system label for edge protection system
LBL-SIDE-PROTECTION-SYSTEM-ECONOMY
Art.-no. 0838908075
EAN 4068362746017
Individual price display after login
Exclusively for trade customers
Register now and access more than 125,000 products
Customisable label for the ECONOMY edge protection system.
- The label is part of the ECONOMY edge protection system.
Notice
- In the event of a return of goods as a gesture of goodwill, we are entitled to charge a restocking fee of 15 % of the value of the goods returned.
- During the installation of the edge protection system, appropriate protective measures must be taken to prevent a fall.
- When using the temporary edge protection system, the site-specific wind loads in accordance with EN 1991-1-4 must be observed. It is suitable for wind zones 1 and 2 with a maximum wind speed of 110 km/h.
- Certified in accordance with DIN EN 13374:2025 class A.
- This article is subject to extra transport costs. Please contact your local Würth sales representative for more information.
Product information
Datasheets(X)
Application area
- The ECONOMY edge protection system enhances protection at falling edges, such as roof edges and domed and strip roof lights without fall-through protection.
- The guardrails are fixed with weights or firmly fixed to the structure as a self-supporting system.
- The system is available with various brackets and fastenings on the parapet and base material.
- Suitable for the construction and maintenance of buildings and other structures.
- For use by skilled workers on roof surfaces that are not accessible to the public.
Instructions
- Position the label at the designated position on the edge protection system so that it is clearly visible.
- Mount on the post or railing element using the appropriate fastening.
EN standard | 13374 |
Length | 120 mm |
Width | 50 mm |
Width x length | 50 mm x 120 mm |
Material | Aluminium |
Last viewed
Heavy-duty box wrench metric, depressed centre
Threaded fitting
Hexagon nut ISO 4032 steel 8, hot-dip galvanised (HDG)
Hexagon nut, heavy-duty design, inch ASME B18.2.2, hot-dip galvanised GR2H steel, UNF (fine thread)
Dispenser system for ORSY® 10 equipped with dry abrasive paper
Carry strap
Base plate for square-perforated panel system
Hexagon Socket Head Cap Screw with centre, with low head DIN 6912, blue passivated zinc plated 10.9 steel (A2K)
Cable grommet with perforated membrane CR
ECONOMY bracket for base board for trapezoidal roof sheet