EIFS material, 310 G 8.5 x 6.5 For reinforcing surfaces inside and outside
EIFS material, 300 G 8.5 x 6.5
MSH-ETICS-310G-8,5 X 6,5-WHITE-50QM
Register now and access more than 125,000 products
- Made of tear-resistant, alkali-resistant and non-slip fibreglass cloth
- By embedding the reinforcement fabric, an effective increase in the crack resistance of the plaster is achieved and unwanted crack formation caused by high shock loads is avoided.
- Suitable for the reinforcement of CERAfix floor levelling compounds and thin-bed mortar, especially for CERAfix floor levelling compounds on wooden surfaces.
- Reinforcement on mixing masonry/mixed substrates for wall surfaces
Material | Fibre glass, shift resistant |
Coating weight per m² | 310 g |
Mesh size | 8,5 x 6,5 mm |
Colour | White |
Roll width x roll length | 1 x 50 m |
Resistance against | Alkali |
Plasticiser-free | Yes |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Work dungarees
Countersunk washer/washer A1 stainless steel
Hexagon Socket Head Cap Screw with low Head DIN 7984, steel 10.9, plain
Drilling screw, countersunk head with H cross recess pias® WN 212, A2 stainless steel, countersunk head H
Passenger car rubber valve, Snap-In Eco
Rim brush
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Three-punch expander pliers Three-punch pliers
Pan head screw with H cross recess DIN 7985, steel 4.8, zinc-plated, blue passivated (A2K)
Countersunk screw with hexagon socket head ISO 10642, steel 10.9, plain
