EPDM butyl outdoor sealing tape - SEALTPE-RAL-OUTS-EPDM/BUTYL-1,2X250X20M

EPDM butyl outdoor sealing tape

Name: EPDM butyl outdoor sealing tape
Brand: Würth
SKU: 0875350252

EPDM sealing tape, outside butyl
SEALTPE-RAL-OUTS-EPDM/BUTYL-1,2X250X20M

Art.-no. 0875350252

EAN 4050642138223

All versions

Similar products

Prices for customers after login

EPDM butyl outdoor sealing tape

Art.-no. 0875350252

Prices for customers after login

Quantity

x 4 pcs

Exclusively for trade customers

Login/Register
Call customer service:

Breathable, elastic and weather-resistant sealing tape

Waterproof and breathable

Provides reliable seal against water from outdoors

At the same time, the membrane has sufficient diffusion permeability to allow water vapour from indoors to diffuse outdoors, thereby preventing moisture-related damage to buildings

Thanks to its high-quality and flexible material, the EPDM film remains permanently sealed and compensates particularly well for component movements

Its high UV and weathering resistance make the EPDM film ideally suited for permanently secure sealing

Reliable installation is also achieved on slightly uneven construction surfaces, when combined with EPDM sealing tape adhesive

Good compatibility with bitumen

Notice

Not suitable for seals in accordance with the water influence classes W2.2-E (high exposure to pressurised water ≥3 m immersion depth), W3-E (non-pressurised water on ceilings covered with earth) according to DIN 18533, as well as seals against pressurised water according to DIN 18195-6.

Tape cannot be plastered over.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Permanent, reliable sealing of joints outdoors, e.g. for window sills, floor-level windows and balcony doors, for outside door sills, conservatories and in façade area.

Thickness 1.2 mm: Joints behind perimeter insulating materials

Corresponds to the following water influence classes from DIN 18533

W1.1-E: Floor moisture and non-pressurised water for floor panels and walls in contact with the ground

W1.2-E: Floor moisture and non-pressurised water for floor panels and walls with drainage in contact with the ground

W2.1-E: Moderate influence from pressurised water ≤ 3 m immersion depth

W4.E: Spray water on the wall socket as well as capillary water in and under walls in contact with the ground

Instructions

The surfaces must be dry, dust- and grease-free and capable of bearing loads.

Installation: Cut the EPDM tape to the required length. Apply the EPDM sealing tape adhesive to the surface and wipe off with a spatula. Glue the EPDM tape to the surface and press on lightly using a press-on roller, while ensuring tension-free installation.

On the frame/element, the sealing tape in the version with self-adhesive strips and/or with the sealing of components in contact with the ground must be fixed in place according to DIN18533 with a mechanical assembly.

Colour	Black
Adhesive base	Butyl
Chemical basis	Ethylene propylene diene natural rubber
Width	250 mm
Thickness	1.2 mm
Length of roll	20 m
Design	With butyl adhesive strip
Min./max. temperature resistance	-30 to 75 °C
Building material class/conditions	B2 - Normally inflammable / in accordance with DIN 4102
Ultraviolet resistance	Yes
Max. water-vapour diffusion resistance factor value µ	5882
Elongation at break	300 %
Resistance against	Weather

Additive article:

Product

Description

Quantity

Price
/PU

EPDM sealing tape adhesive

SEALTPEADH-EPDM-600ML

Art.-no. 0893700150

Low-solvent special adhesive for reliable, long-term adhesive bonding of EPDM tapes

x 20 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).