ERGOPOWER PAD wireless charging pad
Charging pad PAD for Ergopower+ lamps
CHRGPAD-(PAD II)-F.BTRYLAMP-WIRELESS
Register now and access more than 125,000 products
- 2 rear-mounted magnets for mounting on metallic surfaces
- 4 through holes for screw mounting (fixings not included)
- Additional USB-A output for charging other devices
- Efficient and convenient charging thanks to the lamp's optimised self-positioning on the load plate
Only suitable in combination with lamps from the ERGOPOWER+ series. The charging pads are not approved for charging smartphones or mobile phones.
Datasheets(X)
For indoor use
Type description | Pad II |
Design | For two ERGOPOWER+ lamps |
IP protection class | IP 20 |
Protection class | Protection class III/safety extra-low voltage |
Protection class charger | Protection class II/protective insulation |
Min./max. nominal voltage | 100 / 240 V/AC |
Min./max. frequency | 50 / 60 Hz |
Max. nominal voltage 2 | 5 V/DC |
Max. current | 2 A |
Power-lead length | 1000 mm |
Connection type | USB type A, USB type C |
Width x height x depth | 210 x 100 x 13.5 mm |
Charging temperature min./max. | -10 to 35 °C |
Last viewed
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
OrgaAer panel support
Hexagon head bolt with full thread for pressure container construction (PED) ISO 4017, steel 25CrMo4, plain
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Work trousers
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
1/2" multi-socket wrench one tool for all applications
Flexible extension 3/8 inch For extremely difficult-to-access screw connections requiring high torques
Lens With seal and screws
Solution 416 furniture castor set