EU HSCo 60° countersink DIN 334C - CNTSNK-CONI-EU-HSCO-60DGR-DIN334C-D8,0MM

EU HSCo 60° countersink DIN 334C

Name: EU HSCo 60° countersink DIN 334C
Brand: Würth
SKU: 5443121008

Conical countersink EU HSCo 60° DIN 334
CNTSNK-CONI-EU-HSCO-60DGR-DIN334C-D8,0MM
ZEBRA

Art.-no. 5443121008

EAN 4062856443918

All versions

Similar products

Prices for customers after login

EU HSCo 60° countersink DIN 334C

Art.-no. 5443121008

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

An all-rounder with extremely uneven pitch (EU) for perfect 60° countersinks.

Extremely uneven pitch

Maximum surface quality: exact, round, chatter-free countersinks

Faster processing thanks to higher cutting speeds

Greatly reduced tool wear

Maximum smoothness in all materials

Much less feed force required

For universal use

Processing of almost all materials possible thanks to special tip geometry and HSCo cutting material.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents


Product code	2270
Material to be processed	Steel, Cast metal, Stainless steel, Titanium, Special alloy, Hard and tough material, Non-ferrous metal, Plastic
Quality	ZEBRA-Premium
Spot-facer diameter (d1)	8.0 mm
Shank diameter (d2)	6 mm
Tip diameter (d3)	5.2 mm
Length (l1)	50 mm
Number of cutting edges (Z)	3 PCS
Standards	DIN 334
Form	C
Cutting material	HSCo
Countersink angle	60 Degree
Surface	Uncoated
Shank style	Cylindrical
Service life (points system)	3 of 4 points
Countersinking speed (point system)	4 of 4 points
Countersinking quality (point system)	4 of 4 points
Versatility (points system)	4 of 4 points
Countersinking behaviour (point system)	3 of 4 points
Material of sub-group	General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Special alloys, Hardox, Spring steels, Aluminium, Aluminium alloys, Aluminium casting alloys (<10% silicon), Aluminium casting alloys (>10% silicon), Magnesium alloys, Copper, low-alloyed, Brass, short-chipping, Brass, long-chipping, Bronze, short-chipping, Bronze, long-chipping, Plastics, thermoset, Plastics, thermoplastic

Cutting values for HSS countersinks, coated
For dia. 6.3–12.4
Material designation	Tensile strength	v_c	f
			Dia. 6.3	Dia. 8.3	Dia. 10.4	Dia. 12.4
General structural steels	≤ 500 N/mm²	45	0,120	0,130	0,135	0,150
General structural steels	≤ 1000 N/mm²	42	0,070	0,080	0,090	0,100
Unalloyed heat-treated steels	≤ 700 N/mm²	42	0,120	0,130	0,140	0,150
	≤ 850 N/mm²	42	0,120	0,130	0,135	0,150
	≤ 1000 N/mm²	34	0,070	0,080	0,090	0,100
Alloyed heat-treated steels	≤ 1000 N/mm²	34	0,120	0,130	0,140	0,150
Alloyed heat-treated steels	≤ 1400 N/mm²	13	0,070	0,080	0,090	0,100
Nitriding steels	≤ 1000 N/mm²	34	0,070	0,080	0,090	0,100
Nitriding steels	≤ 1400 N/mm²	13	0,040	0,050	0,060	0,060
Tool steels	≤ 850 N/mm²	34	0,070	0,080	0,090	0,100
Tool steels	≤ 1400 N/mm²	13	0,040	0,050	0,060	0,060
High-speed steels	≤ 1400 N/mm²	13	0,040	0,050	0,060	0,060
Cast iron	≤ 240 HB	21	0,120	0,130	0,140	0,150
Cast iron	≤ 350 HB	18	0,120	0,130	0,140	0,150
Spheroidal-graphite and malleable iron	≤ 240 HB	18	0,120	0,130	0,140	0,150
Spheroidal-graphite and malleable iron	≤ 350 HB	18	0,120	0,130	0,140	0,150
Chilled cast iron	≤ 350 HB	18	0,040	0,050	0,060	0,060
Stainless steels, sulphurated	≤ 900 N/mm²	9	0,068	0,081	0,090	0,100
Stainless steels, austenitic	≤ 1100 N/mm²	9	0,040	0,050	0,060	0,060
Stainless steels, martensitic	≤ 1200 N/mm²	9	0,040	0,050	0,060	0,060
Titanium and titanium alloys	≤ 850 N/mm²	9	0,070	0,080	0,090	0,100
Titanium and titanium alloys	≤ 1400 N/mm²	9	0,040	0,050	0,060	0,060
Special alloys	≤ 1600 N/mm²	7	0,070	0,080	0,090	0,100
Hardox	Hardox 400–500, XAR 320, XAR 400	4	0,070	0,080	0,080	0,090
Spring steels	≤ 350 HB	9	0,040	0,050	0,060	0,060
Aluminium and aluminium alloys	≤ 400 N/mm²	77	0,150	0,162	0,170	0,190
Wrought aluminium alloys	≤ 650 N/mm²	55	0,150	0,162	0,170	0,190
Cast aluminium alloys ≤ 10% Si	≤ 600 N/mm²	33	0,120	0,130	0,140	0,150
Cast aluminium alloys > 10% Si	≤ 600 N/mm²	22	0,120	0,130	0,140	0,150
Magnesium alloys	≤ 400 N/mm²	77	0,150	0,160	0,170	0,190
Copper, low-alloyed	≤ 500 N/mm²	33	0,150	0,160	0,170	0,190
Brass, short-chipping	≤ 600 N/mm²	72	0,150	0,160	0,170	0,190
Brass, long-chipping	≤ 600 N/mm²	44	0,150	0,160	0,170	0,190
Bronze, short-chipping	≤ 600 N/mm²	72	0,150	0,160	0,170	0,190
Bronze, short-chipping	≤ 850 N/mm²	72	0,150	0,160	0,170	0,190
Bronze, long-chipping	≤ 850 N/mm²	44	0,150	0,160	0,170	0,190
Bronze, long-chipping	≤ 1000 N/mm²	44	0,150	0,160	0,170	0,190
Plastics	≤ 150 N/mm²	33	0,150	0,160	0,170	0,190

Legend
v_c = cutting speed [m/min]
f = feed (mm/r)
The suggested cutting values are reference values and must be adapted to the respective conditions.

Cutting values for HSS countersinks, coated
For dia. 16.5–25
Material designation	Tensile strength	v_c	f
			Dia. 16.5	Dia. 20.5	Dia. 25
General structural steels	≤ 500 N/mm²	45	0,170	0,180	0,210
General structural steels	≤ 1000 N/mm²	42	0,110	0,130	0,150
Unalloyed heat-treated steels	≤ 700 N/mm²	42	0,170	0,180	0,210
	≤ 850 N/mm²	42	0,170	0,180	0,210
	≤ 1000 N/mm²	34	0,110	0,130	0,150
Alloyed heat-treated steels	≤ 1000 N/mm²	34	0,170	0,180	0,210
Alloyed heat-treated steels	≤ 1400 N/mm²	13	0,110	0,130	0,150
Nitriding steels	≤ 1000 N/mm²	34	0,110	0,130	0,150
Nitriding steels	≤ 1400 N/mm²	13	0,070	0,080	0,090
Tool steels	≤ 850 N/mm²	34	0,110	0,130	0,150
Tool steels	≤ 1400 N/mm²	13	0,070	0,080	0,090
High-speed steels	≤ 1400 N/mm²	13	0,070	0,080	0,090
Cast iron	≤ 240 HB	21	0,170	0,180	0,210
Cast iron	≤ 350 HB	18	0,170	0,180	0,210
Spheroidal-graphite and malleable iron	≤ 240 HB	18	0,170	0,180	0,210
Spheroidal-graphite and malleable iron	≤ 350 HB	18	0,170	0,180	0,210
Chilled cast iron	≤ 350 HB	18	0,070	0,080	0,090
Stainless steels, sulphurated	≤ 900 N/mm²	9	0,110	0,130	0,150
Stainless steels, austenitic	≤ 1100 N/mm²	9	0,070	0,080	0,090
Stainless steels, martensitic	≤ 1200 N/mm²	9	0,070	0,080	0,090
Titanium and titanium alloys	≤ 850 N/mm²	9	0,110	0,130	0,150
Titanium and titanium alloys	≤ 1400 N/mm²	9	0,070	0,080	0,090
Special alloys	≤ 1600 N/mm²	7	0,110	0,130	0,150
Hardox	Hardox 400–500, XAR 320, XAR 400	4	0,090	0,110	0,140
Spring steels	≤ 350 HB	9	0,070	0,080	0,090
Aluminium and aluminium alloys	≤ 400 N/mm²	77	0,210	0,230	0,260
Wrought aluminium alloys	≤ 650 N/mm²	55	0,210	0,230	0,260
Cast aluminium alloys ≤ 10% Si	≤ 600 N/mm²	33	0,170	0,180	0,210
Cast aluminium alloys > 10% Si	≤ 600 N/mm²	22	0,170	0,180	0,210
Magnesium alloys	≤ 400 N/mm²	77	0,210	0,230	0,260
Copper, low-alloyed	≤ 500 N/mm²	33	0,210	0,230	0,260
Brass, short-chipping	≤ 600 N/mm²	72	0,210	0,230	0,260
Brass, long-chipping	≤ 600 N/mm²	44	0,210	0,230	0,260
Bronze, short-chipping	≤ 600 N/mm²	72	0,210	0,230	0,260
Bronze, short-chipping	≤ 850 N/mm²	72	0,210	0,230	0,260
Bronze, long-chipping	≤ 850 N/mm²	44	0,210	0,230	0,260
Bronze, long-chipping	≤ 1000 N/mm²	44	0,210	0,230	0,260
Plastics	≤ 150 N/mm²	33	0,210	0,230	0,260

Additional accessory:

Product

Description

Quantity

Price
/PU

ABS 18 COMPACT M-CUBE cordless drill/driver

DRLDRIV-CORDL-(ABS 18 COMPACT)-2X5.0AH

MASTER M-CUBE

Art.-no. 57018003

Compact, powerful and brushless cordless drill screwdriver for moderate screwing and drilling work, developed by Würth to meet the requirements of tradesperson

x 1 pcs

Drilling and cutting foam CUT+COOL

CUTFM-DRL-(CUT-COOL)-400ML

Art.-no. 0893050007

Highly active, high-performance cutting foam for all machining work.

CUT+COOL Perfect drilling and cutting oil

CUTOIL-PERFECT-(CUT-COOL)-400ML

Art.-no. 0893050008

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Cut and Cool Perfect drilling/cutting paste

CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML

Art.-no. 0893050010

Optimum results and safety for all materials and applications

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).