EU HSCo 90° countersink DIN 335C - CNTSNK-CONI-EU-HSCO-90DGR-D25,0MM

EU HSCo 90° countersink DIN 335C - CNTSNK-CONI-EU-HSCO-90DGR-D25,0MM - 1

EU HSCo 90° countersink DIN 335C - CNTSNK-CONI-EU-HSCO-90DGR-D25,0MM - 2

EU HSCo 90° countersink DIN 335C - CNTSNK-CONI-EU-HSCO-90DGR-D25,0MM - 3

EU HSCo 90° countersink DIN 335C

Name: EU HSCo 90° countersink DIN 335C
Brand: Würth
SKU: 0694119025

Conical countersink EU HSCo
CNTSNK-CONI-EU-HSCO-90DGR-D25,0MM
ZEBRA

Art.-no. 0694119025

EAN 4058794439151

All versions

Similar products

Prices for customers after login

EU HSCo 90° countersink DIN 335C

Art.-no. 0694119025

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service:

A Jack of all trades with extremely uneven pitch (EU) for perfect cuts.

Extremely unequal pitch

Optimal surface quality: exact, round, chatter-free countersinking

Faster machining due to higher cutting speeds

Significantly reduced tool wear

Maximum running smoothness in all materials

Much lower infeed force required

3-flat shank

No slippage, ideal for use in hand drills with 3-jaw chuck

For universal use

Almost all materials can be machined due to special tip geometry and HSCo cutting material.

Product packaging made from 100 % PCR (recycled plastic from household waste) and 100 % recyclable

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents


Material to be processed	Steel, Cast metal, Stainless steel, Titanium, Special alloy, Hard and tough material, Non-ferrous metal, Plastic
Quality	ZEBRA-Premium
Spot-facer diameter (d1)	25.0 mm
Shank diameter (d2)	10 mm
Tip diameter (d3)	3.8 mm
Length (l1)	67 mm
Number of cutting edges (Z)	3 PCS
Standards	DIN 335
Form	C
Cutting material	HSCo
Countersink angle	90 Degree
Surface	Uncoated
Shank style	3-face shank
Service life (points system)	3 of 4 points
Countersinking speed (point system)	3 of 4 points
Countersinking quality (point system)	4 of 4 points
Versatility (points system)	4 of 4 points
Countersinking behaviour (point system)	4 of 4 points
Material of sub-group	General structural steels, Non-alloyed tempering steels, Alloyed tempering steels, Nitriding steels, Tool steels, High-speed steels, Cast iron, Ductile iron, Malleable cast iron, White cast iron, Stainless steels, sulphurated, Stainless steels, austenitic, Stainless steels, martensitic, Titanium, Titanium alloys, Special alloys, Hardox, Spring steels, Aluminium alloys, Aluminium wrought alloys, Aluminium casting alloys (>10% silicon), Aluminium casting alloys (<10% silicon), Magnesium alloys, Copper, Brass, short-chipping, Brass, long-chipping, Bronze, short-chipping, Bronze, long-chipping, Plastics, thermoset, Plastics, thermoplastic, Plastics, aramide-fibre reinforced, Plastics, glass/carbon-fibre-reinforced

Legend
v_c = cutting speed [m/min]
f = feed (mm/r)
The suggested cutting values are reference values and must be adapted to the respective conditions.

Countersink diameter	For countersunk head screws	For countersunk head screws
	DIN EN ISO 10642 (Formerly DIN 7991)	DIN EN ISO 2009, 2010, 7046, 7047 (Formerly DIN 963,964,965,966)
4.3 mm	M2	M2
6.3 mm	M3	M3
8.3 mm	M4	-
10.4 mm	M5	M4, M5
12.4 mm	M6	M6
16.5 mm	M8	M8
20.5 mm	-	M10
25 mm	M10, M12	M12
31 mm	M16	-
37 mm	M20	M16

For dia. 16.5–37
Material designation	Tensile strength	v_c	f
			Dia. 16.5	Dia. 20.5	Dia. 25	Dia. 31	Dia. 37
Steels
General structural steels	≤ 500 N/mm²	41	0,170	0,180	0,210	0,240	0,270
General structural steels	≤ 1000 N/mm²	39	0,110	0,130	0,150	0,170	0,190
Unalloyed heat-treated steels	≤ 700 N/mm²	38	0,170	0,180	0,210	0,240	0,270
	≤ 850 N/mm²	38	0,170	0,180	0,210	0,240	0,270
	≤ 1000 N/mm²	31	0,110	0,130	0,150	0,170	0,190
Alloyed heat-treated steels	≤ 1000 N/mm²	31	0,170	0,180	0,210	0,240	0,270
Alloyed heat-treated steels	≤ 1400 N/mm²	12	0,110	0,130	0,150	0,170	0,190
Nitriding steels	≤ 1000 N/mm²	31	0,110	0,130	0,150	0,170	0,190
Nitriding steels	≤ 1400 N/mm²	12	0,070	0,080	0,090	0,120	0,150
Tool steels	≤ 850 N/mm²	31	0,110	0,130	0,150	0,170	0,190
Tool steels	≤ 1400 N/mm²	12	0,070	0,080	0,090	0,120	0,150
High-speed steels	≤ 1400 N/mm²	12	0,070	0,080	0,090	0,120	0,150
Cast metals
Cast iron	≤ 240 HB	19	0,170	0,180	0,210	0,240	0,270
Cast iron	≤ 350 HB	17	0,170	0,180	0,210	0,240	0,270
Spheroidal-graphite and malleable iron	≤ 240 HB	17	0,170	0,180	0,210	0,240	0,270
Spheroidal-graphite and malleable iron	≤ 350 HB	17	0,170	0,180	0,210	0,240	0,270
Chilled cast iron	≤ 350 HB	12	0,070	0,080	0,090	0,120	0,150
High-grade steels
Stainless steels, sulphurated	≤ 900 N/mm²	8	0,110	0,130	0,150	0,170	0,190
Stainless steels, austenitic	≤ 1100 N/mm²	8	0,070	0,080	0,090	0,120	0,150
Stainless steels, martensitic	≤ 1200 N/mm²	8	0,070	0,080	0,090	0,120	0,150
Titanium and titanium alloys	≤ 850 N/mm²	8	0,110	0,130	0,150	0,170	0,190
Titanium and titanium alloys	≤ 1400 N/mm²	8	0,070	0,080	0,090	0,120	0,150
Special alloys	≤ 1600 N/mm²	6	0,110	0,130	0,150	0,170	0,190
Hard materials
Hardox	Hardox 400–500, XAR 320, XAR 400	4	0,090	0,110	0,140	0,160	-
Spring steels	≤ 350 HB	8	0,070	0,080	0,090	0,120	0,150
Non-ferrous metals
Aluminium and aluminium alloys	≤ 400 N/mm²	70	0,210	0,230	0,260	0,300	0,340
Wrought aluminium alloys	≤ 650 N/mm²	50	0,210	0,230	0,260	0,300	0,340
Cast aluminium alloys ≤ 10% Si	≤ 600 N/mm²	30	0,170	0,180	0,210	0,240	0,270
Cast aluminium alloys > 10% Si	≤ 600 N/mm²	20	0,170	0,180	0,210	0,240	0,270
Magnesium alloys	≤ 400 N/mm²	70	0,210	0,230	0,260	0,300	0,340
Copper, low-alloyed	≤ 500 N/mm²	30	0,210	0,230	0,260	0,300	0,340
Brass, short-chipping	≤ 600 N/mm²	65	0,210	0,230	0,260	0,300	0,340
Brass, long-chipping	≤ 600 N/mm²	40	0,210	0,230	0,260	0,300	0,340
Bronze, short-chipping	≤ 600 N/mm²	65	0,210	0,230	0,260	0,300	0,340
Bronze, short-chipping	≤ 850 N/mm²	65	0,210	0,230	0,260	0,300	0,340
Bronze, long-chipping	≤ 850 N/mm²	40	0,210	0,230	0,260	0,300	0,340
Bronze, long-chipping	≤ 1000 N/mm²	40	0,210	0,230	0,260	0,300	0,340
Plastics
Plastics	≤ 150 N/mm²	30	0,210	0,230	0,260	0,300	0,340

For dia. 4.3-12.4
Material designation	Tensile strength	v_c	f
			Dia. 4.3	Dia. 6.3	Dia. 8.3	Dia. 10.4	Dia. 12.4
Steels
General structural steels	≤ 500 N/mm²	41	0,110	0,120	0,130	0,135	0,150
General structural steels	≤ 1000 N/mm²	39	0,060	0,070	0,080	0,090	0,100
Unalloyed heat-treated steels	≤ 700 N/mm²	38	0,110	0,120	0,130	0,140	0,150
	≤ 850 N/mm²	38	0,110	0,120	0,130	0,135	0,150
	≤ 1000 N/mm²	31	0,060	0,070	0,080	0,090	0,100
Alloyed heat-treated steels	≤ 1000 N/mm²	31	0,110	0,120	0,130	0,140	0,150
Alloyed heat-treated steels	≤ 1400 N/mm²	12	0,060	0,070	0,080	0,090	0,100
Nitriding steels	≤ 1000 N/mm²	31	0,060	0,070	0,080	0,090	0,100
Nitriding steels	≤ 1400 N/mm²	12	0,030	0,040	0,050	0,060	0,060
Tool steels	≤ 850 N/mm²	31	0,060	0,070	0,080	0,090	0,100
Tool steels	≤ 1400 N/mm²	12	0,030	0,040	0,050	0,060	0,060
High-speed steels	≤ 1400 N/mm²	12	0,030	0,040	0,050	0,060	0,060
Cast metals
Cast iron	≤ 240 HB	19	0,110	0,120	0,130	0,140	0,150
Cast iron	≤ 350 HB	17	0,110	0,120	0,130	0,140	0,150
Spheroidal-graphite and malleable iron	≤ 240 HB	17	0,110	0,120	0,130	0,140	0,150
Spheroidal-graphite and malleable iron	≤ 350 HB	17	0,110	0,120	0,130	0,140	0,150
Chilled cast iron	≤ 350 HB	12	0,030	0,040	0,050	0,060	0,060
High-grade steels
Stainless steels, sulphurated	≤ 900 N/mm²	8	0,060	0,068	0,081	0,090	0,100
Stainless steels, austenitic	≤ 1100 N/mm²	8	0,030	0,040	0,050	0,060	0,060
Stainless steels, martensitic	≤ 1200 N/mm²	8	0,030	0,040	0,050	0,060	0,060
Titanium and titanium alloys	≤ 850 N/mm²	8	0,060	0,070	0,080	0,090	0,100
Titanium and titanium alloys	≤ 1400 N/mm²	8	0,030	0,040	0,050	0,060	0,060
Special alloys	≤ 1600 N/mm²	6	0,060	0,070	0,080	0,090	0,100
Hard materials
Hardox	Hardox 400–500, XAR 320, XAR 400	4	-	0,070	0,080	0,080	0,090
Spring steels	≤ 350 HB	8	0,030	0,040	0,050	0,060	0,060
Non-ferrous metals
Aluminium and aluminium alloys	≤ 400 N/mm²	70	0,140	0,150	0,162	0,170	0,190
Wrought aluminium alloys	≤ 650 N/mm²	50	0,140	0,150	0,162	0,170	0,190
Cast aluminium alloys ≤ 10% Si	≤ 600 N/mm²	30	0,110	0,120	0,130	0,140	0,150
Cast aluminium alloys > 10% Si	≤ 600 N/mm²	20	0,110	0,120	0,130	0,140	0,150
Magnesium alloys	≤ 400 N/mm²	70	0,140	0,150	0,160	0,170	0,190
Copper, low-alloyed	≤ 500 N/mm²	30	0,140	0,150	0,160	0,170	0,190
Brass, short-chipping	≤ 600 N/mm²	65	0,140	0,150	0,160	0,170	0,190
Brass, long-chipping	≤ 600 N/mm²	40	0,140	0,150	0,160	0,170	0,190
Bronze, short-chipping	≤ 600 N/mm²	65	0,140	0,150	0,160	0,170	0,190
Bronze, short-chipping	≤ 850 N/mm²	65	0,140	0,150	0,160	0,170	0,190
Bronze, long-chipping	≤ 850 N/mm²	40	0,140	0,150	0,160	0,170	0,190
Bronze, long-chipping	≤ 1000 N/mm²	40	0,140	0,150	0,160	0,170	0,190
Plastics
Plastics	≤ 150 N/mm²	30	0,140	0,150	0,160	0,170	0,190

Additive article:

Product

Description

Quantity

Price
/PU

CUT+COOL drilling and cutting oil

CUTOIL-DRILL-(CUT-COOL)-400ML

Art.-no. 0893050004

Multi cutting oil for light to medium machining work

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).