EUROFAST® self-drilling roofing screw EDS-BGT
SCR-HEX-(EDS-BGT-48080)-4,8X80
Art.-no. 0838548080
EAN 4038898951674
Register now and access more than 125,000 products
- For use in the stand-up screw gun
- For use with pressure plates, shape: D (deep = 4.85 mm non-slip), XH (XtraHigh)
Fastener length on
- Trapezoidal steel surface = roof structure + min. 20 mm
- Wooden surface = roof structure + min. 30 mm
- ETA-06/0007 approval
- Tested in accordance with DIN 50018 = 15 Kesternich cycles
Datasheets(X)
Flat roof
 | |
Nominal diameter (d1) | 4.8 mm |
Head diameter (dk) | 10.5 mm |
Head height (k1) | 4.3 mm |
Drill tip length (lp) | 5.0 mm |
Max. material thickness for steel | 2.5 mm |
Head type | Hexagon washer head |
External drive (s1) | WS8 |
Thread design | Partial thread with underhead thread |
Design | Taped |
Material | Steel, case-hardened |
Surface | Flake zinc silver |
Length (l1) | 80 mm |
Thread length (tapping screw thread) (l2) | 50 mm |
RoHS-compliant | Yes |
Approval | ETA-23/0651 |
Last viewed
Straight male fitting ISO 8434-1, stainless steel 1.4571, BSPP male thread with seal
Hexagon Socket Head Cap Screw with low Head DIN 7984, zinc plated 10.9 steel with thick-layer passivation (VZD)
Taper-grooved dowel pin ISO 8745 steel plain
Knurled thumb screw, high profile DIN 464, blue passivated zinc plated 5.8 steel (A2K)
Low-cut safety shoes, S1 Uvex1 Ladies 8561
Threaded fitting
DUO wire end ferrule with plastic sleeve
Flat washer ASME B18.21.1, zinc plated steel
Spare parts car/comm. vehicle special tools
Pipe cable lug with inspection hole