Welcome to Würth Aerospace Solutions For trade customers only
Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector - HOLDOPNDEV-EFR-GTS640G-DIN/R-A2/DESIGN Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector - HOLDOPNDEV-EFR-GTS640G-DIN/R-A2/DESIGN
Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector - HOLDOPNDEV-EFR-GTS640G-DIN/R-A2/DESIGN - 1
Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector - HOLDOPNDEV-EFR-GTS640G-DIN/R-A2/DESIGN - 2

Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector

EFR system with GTS 640G + integrated RSZ
HOLDOPNDEV-EFR-GTS640G-DIN/R-A2/DESIGN

Art.-no. 0688003645
EAN 4061975572509
All versions

Prices for customers after login
Electromagnetic hold-open device, single-leaf Non-hinge side With GTS 640 G and integrated smoke detector

Art.-no. 0688003645

Prices for customers after login
Quantity
PU
x 1 pcs

Exclusively for trade customers

Register now and access more than 125,000 products

Holds a door of up to 1250 mm open securely and meets accessibility requirements in accordance with Spec 18040 and DIN SPEC 1104

The system fulfils the latest testing principles


  • Switch-off time of magnets with alarm min. 3 seconds

  • Override capacity of system/door, can be set to below 80 N (for use without manual button)

  • Line monitoring for ceiling detectors and manual button


All electronic components in the sliding rail are fully pre-mounted, wired and the assemblies checked ex works


  • This enables faster assembly without faults

  • Smoke detector with contamination indicator and automatic calibration for preventing false alarms


Quick mounting of the sliding rail using only two screws


  • Same drilling pattern as with sliding rails for the door closer


Easy routing of the connecting cable through cable duct integrated into the sliding rail

Notice

The use of a manual switch is not absolutely necessary, but is recommended. The opening angle of the door leaf must be limited using a suitable floor door stopper.



The operator of the systems is required to commission the system after initial installation, to test it monthly for the first 12 months, and afterwards, if there are no functional defects, to test it every 3 months and perform a service once a year. Akademie Würth offers seminars in this respect.



Delivery time approx. 10 working days.

Application area

Dimensions subject to change. Subject to technical changes.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

A hold-open device is an electrical device that is used to keep fire protection closures open. The door leaf can be held in the open position until the device is either tripped manually or automatically via the smoke detector in the event of a fire or power failure, then the door closes. For single-leaf fire, smoke protection and panic doors made of metal or wood.

Area of application

Hold-open device
Object area
Private area

Suitable for

Fire protection doors
Smoke protection doors
Panic doors

Suitable for number of doors

1

Fire protection certified

Yes

Suitable for barrier-free construction according to DIN 18040

Yes

Colour

Stainless steel, matt

Colour slide rail

Stainless steel, matt

Gloss level

Matt

Suitable for min./max. door width

860-1250 mm

DIN direction

DIN R

Mounting option

Opposite hinge side: standard mounting
With assembly base plate

Opening angle

110 Degree

Min./max. door closer size

2-5

Material

Aluminium / stainless steel / plastic / steel

Surface

Lacquered

Surface of the body

Lacquered

Surface of the rail

Lacquered

Suitable for min./max. door thickness

40-72 mm

Locking range

80° - 110°

Closing speed

Infinitely adjustable by valve 130° - 0 °

Closing delay

Infinitely adjustable by valve 120 ° - 70 ° opposite hinge side normal assembly

Latching speed

Infinitely adjustable by valve 10° - 0 °

Back-check action

Infinitely variable adjustable from 70 °

Min./max. temperature conditions

-15 to 40 °C

Nominal voltage

230 V/AC

Standards

EN 1154:1996 + A1:2002, EN 1155:1997 + A1:2002, EN 16034, EN 16035, DIN 18040-1, DIN 18040-2, DIN SPEC 1104

EC declaration of conformity (CE)

Yes

Environmental Product Declaration

Yes

Construction product

Yes

Direct installation on hinge side DIN R (DIN L mirror-image)
1: Hole for electrical connection (230 V AC), 2: Additional connections (optional)
max. opening angle (in degrees) across X and Z
X Z-1.50251015
60128127126125122119
65125125123122119117
70123122121119117114
75120119118117114112
80117117116114112109
85115114113112109108
90112112111109107105
95110109108107105103
Note: Max. holding angle is 3-5° below the max. opening angle
Non-hinge side installation with adapter profile 40 DIN R (DIN L mirror-image)
1: Hole for electrical connection (230 V AC), 2: Additional connections (optional)
max. opening angle (in degrees) across X and Z
X Z-6.5-5-30510
60128127126125122119
65125125123122119117
70123122121119117114
75120119118117114112
80117117116114112109
85115114113112109107
90112112111109107105
95110109108107105103
Note: Max. holding angle is 3-5° below the max. opening angle
Non-hinge side installation with lintel casing bracket R (DIN L mirror-image)
1: Hole for electrical connection (230 V AC), 2: Recommended distance, taken into account here
max. opening angle (in degrees) across X and Z
X Z1246810
60125124123122121120
65122121120119118117
70119119118117116115
75117116115114113112
80114114113112111110
85112111110109108107
90109109108107106105
95107107106105104103
Note: Max. holding angle is 3-5° below the max. opening angle
Classification key in accordance with DIN EN 1154: 1996 + A1:2002
3/482 - 5114
Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Doorstop, type G
Doorstop, type G

DRSTOP-G-A2-MATT

3-point mounting by means of a screw (visible) and two vulcanised locking pins dia. 8 mm
x 1 pcs
Inspection kit
Inspection kit

INSP-SET-(F.HOLDOPN-DEV)

Required for the acceptance and maintenance of Würth hold-open devices
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
A 602 FS door handle
A 602 FS door handle

DH-A2-A602/FS-CH-ROS-CK-R-MATT

Fire protection tested, meets the valid requirements for fire protection and escape doors
x 1 pcs
Door handle A 807 on oval escutcheon
Door handle A 807 on oval escutcheon

DH-A2-A807/FS-OVAL-ROS-L/R-MATT

x 1 pcs
ORS 142 smoke switch For closing sequence controls and hold-open devices
ORS 142 smoke switch For closing sequence controls and hold-open devices

SMKSWTCH-F.CSEQ-ORS142-WHTE

x 1 pcs
ORS 143 A base
ORS 143 A base

MNTBSE-(F.CSEQ-ORS142)-(ORS-143A)-WHTE

Universal base for surface mounting on the ceiling
x 1 pcs
TDS 247 thermal switch
TDS 247 thermal switch

THERMOSWTCH-F.CSEQ-TDS247-WHTE

Particularly suitable for use in harsh environments with dust and smoke
x 1 pcs
P - 250 test gas For smoke detector and smoke switch
P - 250 test gas For smoke detector and smoke switch

TESTGAS-(F.HOLDOPN-DEV)-P250-DET-250ML

918-5 test gas For smoke detector and smoke switch
918-5 test gas For smoke detector and smoke switch

TESTGAS-F.DET-918/5-250ML

Hand switch HAT 02
Hand switch HAT 02

HNDSWTCH-F.CSEQ-(HAT-02)-AP-UP

x 1 pcs
FH 30 mortise lock for fire doors with central locking mechanism
FH 30 mortise lock for fire doors with central locking mechanism

MORTLOK--FP30-CK-DIN/R-L-ZN-65-24

x 1 pcs
RR02 panic tubular frame mortise lock
RR02 panic tubular frame mortise lock

MORTSLOK-TF02-APE-CK-DIN/R-L-A2-WT-45

Mortise locks for tube frame doors or profile doors with panic function
x 1 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details