Elevation triangle Aluminium (EN-AW-6063 T6)
Column triangular
COLMN-TRI-FLATROOF-ALU-(10-15GRD)
ZEBRA
Register now and access more than 125,000 products
Fully pre-assembled, meaning that the triangle can be attached to the roof without any preparatory work
An inspection must be carried out beforehand by an expert, as the individual features of the particular roof must be taken into account. Every elevated photovoltaic system must be selected and structurally calculated on a case-by-case basis depending on the location, roof structure and building load-bearing structure. The residual load-bearing capacity of the building must be evaluated beforehand for each system by a structural engineer.
Datasheets(X)
 | |
Limb length | 1230 mm |
Limb length 2 | 1300 mm |
Width | 33 mm |
Preset angle | 10° |
Possible elevation angle | 15° |
Material | Aluminium |
Surface | Plain |
Material designation | EN-AW-6063 T6 |
Product weight (per item) | 2572.000 g |
Last viewed
Compressed air spray
HSCo8 end mill, short, centre-cutting DIN 844K
Cetus trousers with holster pockets
Blind rivet, open, with break mandrel and flat head ISO 15979, dome head, steel/steel
Hexagonal bolt with thread up to the head ISO 4017, A4-70 stainless steel, plain
Pull handle ST/A200
Low-cut safety shoe S2
Subland stepped drill bit DIN 8374, RN-fine, 90°
Hexagonal bolt with flange in accordance with MBN standard
Diamond dry core drill bit Klingspor DR 912 B Special