Elevation triangle Aluminium (EN-AW-6063 T6)
Column triangular
COLMN-TRI-FLATROOF-ALU-(20-30GRD)
ZEBRA
Register now and access more than 125,000 products
Fully pre-assembled, meaning that the triangle can be attached to the roof without any preparatory work
An inspection must be carried out beforehand by an expert, as the individual features of the particular roof must be taken into account. Every elevated photovoltaic system must be selected and structurally calculated on a case-by-case basis depending on the location, roof structure and building load-bearing structure. The residual load-bearing capacity of the building must be evaluated beforehand for each system by a structural engineer.
Datasheets(X)
 | |
Limb length | 1230 mm |
Limb length 2 | 1300 mm |
Width | 33 mm |
Preset angle | 20° |
Possible elevation angle | 30° |
Material | Aluminium |
Surface | Plain |
Material designation | EN-AW-6063 T6 |
Product weight (per item) | 2500.000 g |
Last viewed
Spare hose holder WSH AIR III For WSH AIR III fan units
WE system workshop trolley
Quick-action coupling with hose connection series 2000 For Würth PVC hoses
Wooden panel for workshop trolleys
Sink Blancorondosol/-IF
Full-vision goggles uvex 9305
Painters' spatula Made of flexible, high-quality steel (taper ground)
Adhesive Plate Without Hole M14 Soft For dry abrasive paper
Hexagon nut, high profile with clamping piece (non-metal insert), imperial
Parking light bulb T4W HD With greater resistance to vibration (heavy-duty)