End brush Steel, crimped, with shank

Name: End brush Steel, crimped, with shank
Brand: Würth
SKU: 5465400124

Wire end brush steel with shank
CENTFBRSH-PWRDRL-STEEL-D12X6MM

Art.-no. 5465400124

EAN 4065746775014

All versions

Specification

Ideal for machining hard-to-reach areas on steel and cast metal. For light-duty brushing work such as deburring, cleaning and derusting.

Notice

High speeds improve brush performance and service life, especially in the case of straight grinders and manual grinders

Only the edge tips act on the workpiece. While excessive contact pressure does not improve the result, it does increase the required drive power and reduces the service life of the brush.

Instructions for use (optimising brushing results)
Action	Circumferential speed	Brush diameter	Wire thickness	Bristle length
Increase brushing effect	↑	↑	↑	↓
Reduce brushing effect	↓	↓	↓	↑
Brush deburrs	↓		↑	↓

Recommended circumferential speeds for brushing
Applications	Circumferential speed [in m/s]
	15	20	25	30	35	40	45	50
Deburring			25 - 35
Cleaning welding seams					35 - 45
Removing scale					35 - 45
Polishing				30 - 40
Plastic machining	15 - 25

Application area


Diameter (D1)	12 mm
Sleeve diameter (D2)	10 mm
Usable length of wire (H)	20 mm
Wire diameter	0.3 mm
Length (L)	120 mm
Shank diameter (S)	6 mm
Material of wire	Steel
Design	Corrugated, with shank
Aggressiveness	Middle
Suitable for cordless drills (points system)	2 of 4 points
Suitable for drill (points system)	2 of 4 points
Suitable for straight grinder (point system)	4 of 4 points
Max. rotation speed	15000 1/min
EN standard	1083-2