Engine oil TRIATHLON® Dynamik 10W-40
Engine oil TRIATHLON Dynamik 10W-40
ENGOIL-DYNAMIK-10W40-60LTR
TRIATHLON
Register now and access more than 125,000 products
Fast oil supply at low temperatures
High resistance to shearing and ageing
Suitable for long oil change intervals
TRIATHLON engine oils are produced and packaged in compliance with the most stringent quality specifications in line with DIN EN ISO 9001
- High product safety
- Extensive manufacturer approvals
Only high-quality first raffinates and raw materials are used in TRIATHLON oils
Satisfies important specifications of automotive manufacturers
Observe the operating instructions of the vehicle and engine manufacturer for standard and extended oil change intervals.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Datasheets(X)
For lorries, modern low-viscosity engine oil for diesel engines. Suitable for long oil change intervals.
Contents | 60 l |
Type of oil | HC synthesis |
Viscosity grade | 10W-40 |
Approved for engine oils | API SL, API CI-4, MAN M3275-1, DTFR 15B110 (228.3), ACEA A3/B4, ACEA E7 |
Recommended applications for engine oils | MB 229.1, Volvo VDS-3, Global DHD-1, Mack EO-M Plus, MTU Type 2, Cummins 20076, Cummins 20077, Cummins 20078, Caterpillar ECF-2, Caterpillar ECF-1-a, Renault RLD-2, Renault RLD, Deutz DQC III-10, Cummins 20071 / 20072 |
Shelf life from production | 60 Month |
Density | 0.87 g/cm³ |
Density conditions | at 15°C |
Min. flashing point | 225 °C |
Pour point | -38 °C |