FIX connectors
FIX connector for SML pipes
FIX-CON-(F.SML-RO)-DN125
Register now and access more than 125,000 products
For the transition from SML pipes to plastic pipes
Datasheets(X)
- Mount Fix connector on the pipe or moulded piece up to the spacer ring of the seal and fasten with the pipe clamp supplied (tightening torque: approx. 2 Nm).
- Pull on opening pin with pliers and remove rubber membrane
- Mark connection pipe for the necessary slide-in depth, apply lubricant and slide in
 | |
Suitable for min./max. pipe outer diameter | 125-135 mm |
Material | EPDM (ethylene propylene diene monomer rubber) |
DN nominal width | DN 125 |
Insertion depth | 75 mm |
Insertion length (L1) | 21 mm |
Suitable for min. pipe external diameter | 125 mm |
Suitable for max. pipe external diameter | 135 mm |
Length (L2) | 103 mm |
Diameter (D1) | 145 mm |
Last viewed
Sealing washer
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
ISO insert holder with M clamping system for VN indexable inserts
High-visibility jacket
Stud with threaded end ≈ 1.25 d DIN 939, steel 10.9, plain
Safety screw with hexalobular head and pin Similar to ISO 10642 because of TX drive, A2 stainless steel, plain
Split pin ISO 1234 A4-70 stainless steel, plain
Stepped drill bit
SHP 28-C ear defenders For combining with hard hats that feature a 16 mm double-slot system e.g. Baumeister hard hats
Internal tab washer