Welcome to Würth Aerospace Solutions For trade customers only
FLEXEN<SUP> </SUP>acoustic insulation - INSU-FLC-NOISEPROT-10M-9MMXDN100

FLEXEN acoustic insulation

INSU-FLC-NOISEPROT-10M-9MMXDN100

Art.-no. 0873100100

EAN 4050642725867

All versions
Individual price display after login
FLEXEN acoustic insulation

Art.-no. 0873100100

Individual price display after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

Highly flexible insulation made of polyester fleece with tear-resistant outer skin and excellent sound insulation properties
  • Tested acoustic insulation: Meets the increased acoustic insulation requirements in accordance with DIN 4109/VDI 4100

  • Due to very good sliding properties and generously dimensioned inner diameters, it is easily pulled over sleeves and bends

  • Building material class B1, flame-retardant
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area

For the insulation of waste water pipes.

Material

Polyester fleece

Material of outer layer

PE - Polyethylene

Colour

Silver coloured

Insulating-material thickness

9 mm

Length of roll

10 m

Min./max. temperature conditions

-60 to 150 °C

Heat conductance λ

0.031 W/(m*K)

Heat conductance λ conditions

at 10°C average temperature, according to test report 2207-P-12

Building material class

B1 - Of low flammability

Building material class conditions

in accordance with DIN 4102, according to test report P-BRA09-3429113

Risk of corrosion

Fulfils the requirements

Conditions for risk of corrosion

in accordance with DIN 1988-200

Sound-pressure level of HT pipe

24 dB

Conditions for sound-pressure level of HT pipe

at 2 l/s volume flow, DIN 4109, VDI 4100, according to test report P-BA 152-1/2010

Suitable for HT/SML pipe (DN nominal width)

DN.. 100..

Required accessory:
 
Product
Description
Quantity
PU
Price
/PU
Noise protection, wrapping tape for FLEXEN acoustic insulation
Noise protection, wrapping tape for FLEXEN acoustic insulation

WRAPGTPE-NOIPROT-SA-FOIL-70MMX5MX6MM

x 10 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Additional accessory:
 
Product
Description
Quantity
PU
Price
/PU
Noise protection, wrapping tape for FLEXEN acoustic insulation
Noise protection, wrapping tape for FLEXEN acoustic insulation

WRAPGTPE-NOIPROT-FOIL-70MMX5MX6MM

x 10 pcs
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details