FP connector
FT connector for finished parts
FT-CON-F.FINPRT-(SCR-VG-D10MM)
ASSY
Register now and access more than 125,000 products
Advantages:
- Approx. four times the load-bearing capacity of conventional WCC options with screws, allowing a reduction of the installation time
- Predetermined insertion angle
- High overall rigidity of the ceiling structure
- Helps to create joist and solid timber ceilings with longer clear spans or higher load-bearing capacities
- No licensing, high value creation of in-house production
- Flexible use in several systems
Especially for the installation of dry, precast concrete elements with integrated FT connectors:
- Very quick installation
- Full load-bearing capacity of the composite structure directly after fastening (immediate composite action)
- No waiting time while concrete is curing; construction work can continue
- No separating layer that needs to be masked
- Minimises the entry of moisture into the building as well as the swelling or shrinkage of timber parts
When using prefabricated concrete part elements:
- Merging of prefabricated concrete part elements with the wooden ceiling, without gaps, using additional ASSY 4 WH washer head screws
- Torque value (20 Nm) of the ASSYplus VG 4 countersunk head screws, 10 mm diameter for the FT connector
- To prevent the wooden ceilings shrinking after assembly, the unfinished wooden ceiling must be protected against moisture penetration
- To prevent the upper cap cover from being loosened, vibration/shaking of the element in the pre-assembled state without concrete must be avoided
- Timber dimensioning software, load tables and detailed processing instructions can be found on the service page www.wuerth.de/assy.
ETA-13/0029
Expert report (from Karlsruher Institut für Technologie (KIT)) on improving concrete strength (up to 120 mm)
Suitable for on-the-spot installations of wood/concrete ceilings using wet concrete or for screwing pre-cast parts made by the factory (FP) with cast-in connectors to a corresponding wood ceiling system. Suitable for use in joist and solid timber ceilings. Approval for use in service class 1 and 2 (with sufficient concrete covering). Concrete strengths of 7 cm (standard) up to a maximum of 12 cm (wood lining) are possible.
 | |
Baseplate length | 111 mm |
Width | 50.0 mm |
Height | 70.0 mm |
Material | Steel / plastic |
Surface | Plain |
Weight | 153 g |
Number of pieces | 3 PCS |
Approval | ETA-13/0029 |
Use class | 1 |
Number of D 11 mm holes | 1 PCS |
Suitable for screw | ASSYplus VG countersunk head diameter 10 mm |
Area of application | Wood-concrete-composite |
Datasheets (1)
CAD data (available after login)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
Last viewed
STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
Wind brace band tensioner
Work trousers
Connector, pneumatic
Cylindrical pin, unhardened with oval points DIN 7, plain steel (9 SMnPb 28 k or St 50 K), unhardened, tolerance class m6
Hexagon nut, flat profile with fine thread
Low-cut safety shoes, S3
Cable ties with plastic latch, heat-stabilised – industrial quality
Rubber module, large
Spare weld spray head For REFILLO® cans
