Fabric Quick Change Disc Klingspor QMC 411
Quick Change Disc cloth-backed Klingspor QMC 411
CHANGEDISC-KLINGSPOR-295300-D50-K36
Register now and access more than 125,000 products
- Aggressive sanding behaviour thanks to self-sharpening zirconia alumina
- High removal rate on steel and stainless steel
In the QMC series, the sanding disc is simply placed on the backing pad and screwed in place by hand using the female thread of the plastic adapter. The Quick Change Discs can also be used on commercially available angle grinders. Appropriate adapters are available from Klingspor for this purpose.
Datasheets(X)
Diameter (Ø) | 50 mm |
Grid size | 36 |
Backing material | Y-polyester |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Rubber modules, small
Pipe cable lug with inspection hole
Vacuum lifter With vacuum pump and vacuum indicator in practical storage case
Solid carbide ball nose end mill, short, twin blade
Synchronisation module For Dynapro Tipmatic full-extension concealed slide 40/60 kg
3M™ Dual Lock™ flexible pressure lock SJ387B
Work jacket JN1122 men's zip-off softshell jacket
Twist drill bit HSCo8 WN MAGMA
Cylinder tapping screw, shape C with slot DIN 7971, A2 stainless steel, plain
SCHIMOS 40 damping set for wooden and glass doors