Fabric Quick Change Disc Klingspor QMC 411
Quick Change Disc cloth-backed Klingspor QMC 411
CHANGEDISC-KLINGSPOR-295303-D50-K60
Register now and access more than 125,000 products
- Aggressive sanding behaviour thanks to self-sharpening zirconia alumina
- High removal rate on steel and stainless steel
In the QMC series, the sanding disc is simply placed on the backing pad and screwed in place by hand using the female thread of the plastic adapter. The Quick Change Discs can also be used on commercially available angle grinders. Appropriate adapters are available from Klingspor for this purpose.
Datasheets(X)
Diameter (Ø) | 50 mm |
Grid size | 60 |
Backing material | Y-polyester |
Material of abrasive medium | Zirconium conrundum |
Last viewed
Abrasive flap disc Klingspor SMT 624 Supra
WÜTOX CSMR steel zinc plated PT cs milling head TX
Twist drill bit HSCo DIN 340 type RN OXIDE
Plasterboard saw
Safety boots, S2
Countersunk screw with hexagon socket, galvanised ISO 10642, steel 10.9, zinc-plated, blue passivated (A2K)
Washer with large outside diameter DIN 9021, brass, plain
Countersunk head screw with hexagon socket ISO 10642, A2-070 stainless steel, plain
GEFU® thread-rolling screw With Taptite 2000® thread, hexagon head with collar and hexalobular drive (TXplus)
Bar handle, stainless steel