Fabric sanding belt Klingspor CS 411 X
Clth-bckd snd blt alumina-zirc. Klingspor CS 411 X
GRNDROLL-KLINGSPOR-26969-75X2-G80
Register now and access more than 125,000 products
CS 411 X is a high-performance sanding belt with a high removal rate, for example for coarse sanding and for the deburring of steel and stainless steel workpieces. The basis for this is the slow-wearing zirconia alumina grit with dense scattering. In combination with the tear-resistant cotton backing and the durable synthetic resin bond, this contributes to the longevity and excellent load-bearing capacity of the sanding belts.
Datasheets(X)
Width x length | 75 mm x 2 m |
Grid size | 80 |
Material of abrasive medium | Zirconium conrundum |
Backing material | X-cotton fabric |
Last viewed
Work coat
Round holder For square holes in perforated plates, workshop trolleys and the ORSY®1 shelving systems
Split pin
Identification rings, PVC
Article sticker
Hexagon socket set screw with truncated cone ISO 4026 steel 8.8, zinc-plated blue passivated (A2K)
Raised contersunk head tapping screw, C shape with H recessed head DIN 7983, A2 stainless steel, plain. With cross recess.
Countersunk rivet
HPT extra-short twist drill bit DIN 1897
ASSY® 4 WH washer head screw Steel zinc plated partial thread washer head