Fabric sanding belt Klingspor CS 411 Y
Cl-bkd snd blt alumina-zirconia Klingspor CS 411 Y
GRNDROLL-KLINGSPOR-62056-75X2-G24
Register now and access more than 125,000 products
The waterproof sanding belt type CS 411 Y can be used for a variety of metalworking applications. Examples include aircraft construction, the automotive industry, the manufacture of pipes and railings as well as equipment engineering and container construction.
The tear-resistant polyester backing ensures a high load-bearing capacity. The grit is made of self-sharpening zirconia alumina. This ensures a high level of aggressiveness and thus a very good removal rate. The machining of stainless steel is also optimised by special active sanding agents in the size coat. These prevent premature vitrification of the abrasive grain.
Datasheets(X)
Width x length | 75 mm x 2 m |
Grid size | 24 |
Material of abrasive medium | Zirconium conrundum |
Backing material | Y-polyester |
Last viewed
pias® drilling screw with hexagon head and drill tip Case-hardened steel, zinc-plated, blue passivated
ASSY® 4 A2 RCS wood façade screw A2 stainless steel plain partial thread raised countersunk head
Slotted flat-head screw ISO 1580, brass, plain
Soft wax
Work shorts
Twist drill bit HSS DIN 338 type RN 118°
Threaded rod DIN 976, A2-70 stainless steel, shape A
13-pin connector 12V
Hexagonal bolt, with thread to head and fine thread DIN 961, steel 8.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head