Fabric sanding belt Klingspor LS 309 X
Cloth-backed snd belt corundum Klingspor LS 309 X
GRNDROLL-KLINGSPOR-38895-100X860-G60
Register now and access more than 125,000 products
To ensure a high material removal rate, the tear-resistant cotton backing of the LS 309 X is coated with a hard corundum abrasive grain applied in a dense scattering with an all-synthetic resin bond. The LS 309 X sanding belt is used, among other things, in the metalworking industry, in the wood industry and in the craft sector. In the wood industry, it is primarily used for the surface sanding of hardwood. In metalworking, it can be used for coarse and fine sanding thanks to the different grain sizes offered by Klingspor.
Datasheets(X)
Width x length | 100 mm x 860 mm |
Grid size | 60 |
Material of abrasive medium | Corundum |
Backing material | X-cotton fabric |
Last viewed
Twist drill bit HSCo DIN 338 Type RN MFD VARIO
Hexagonal bolt with thread up to the head ISO 4017, steel 8.8, zinc-plated thick-film passivated (ZSML)
Worktop cover for Ultimate system workshop trolleys
Cylindrical roller bearing FAG
Castellated nut, low profile with fine thread DIN 937, steel, 17H/22H, plain
Ducting clamp DIN3015-2, heavy-duty series, ribbed inner surface, W.TEC series
Pre-charged NiMH high-capacity rechargeable battery Pre-charged
Turnbuckle sleeve produced from steel tube DIN 1478 (made from steel tube), steel L235 (S235JR), hot-dip galvanised (hdg)
Work jacket
Hexagonal nut with clamping piece (all-metal) ISO 7042, A4-70 stainless steel, plain