Fabric sanding belt Klingspor LS 309 X
Cloth-backed snd belt corundum Klingspor LS 309 X
GRNDROLL-KLINGSPOR-42199-100X1000-G120
Register now and access more than 125,000 products
To ensure a high material removal rate, the tear-resistant cotton backing of the LS 309 X is coated with a hard corundum abrasive grain applied in a dense scattering with an all-synthetic resin bond. The LS 309 X sanding belt is used, among other things, in the metalworking industry, in the wood industry and in the craft sector. In the wood industry, it is primarily used for the surface sanding of hardwood. In metalworking, it can be used for coarse and fine sanding thanks to the different grain sizes offered by Klingspor.
Datasheets(X)
Width x length | 100 mm x 1000 mm |
Grid size | 120 |
Material of abrasive medium | Corundum |
Backing material | X-cotton fabric |
Last viewed
Accessories for identification rings
Electronic labelling unit DYMO LabelManager 420P
Dry abrasive paper strip wood KP perfect
Threaded fitting
Twist drill bit HSCo DIN 340 type RN OXIDE
Bulk material rail set For large-compartment rack
Battery For MLLG 18
HSS saw blade For plastics, GFRP, wood, putty, non-ferrous metals and sheet metal up to approx. 1 mm
Work trousers
E-Cut saw blade, single tooth, long