Fabric sanding belt VSM KK718X
Cloth-backed sanding belt corundum VSM KK718X
SNDBL-CLTH-VSM-KK718X-100X3500MM-K600
Register now and access more than 125,000 products
KK718X is ideal for grinding tubes and rods in the centreless process or wire finish on planetary grinding machines; at medium to high contact pressure. The long-term abrasive also boasts a uniform grinding finish and uniform surface roughness over the entire, very long service life when sanding flat steel in a continuous process.
- Reduced sanding costs due to lower tool consumption and fewer tool changes
- For uniform workpiece surfaces and roughness depths with constant removal
- Abrasive additives in the second layer of cover bonding ensure higher removal
Datasheets(X)
Width x length | 100 mm x 3500 mm |
Design | Robust |
Grid size | 600 |
Material of abrasive medium | Aluminium oxide |
Backing material | X-polyester |
Last viewed
Intermediate layer for ISO D clamping system
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Amo® III 7.5 type window frame screw Cylinder head 7.5 mm
Wing bolt, round wings DIN 316, malleable iron, zinc-plated, blue passivated (A2K)
ASME B18.6.3 Phillips stainless steel 18-8 UNC
Flat head tapping screw, type C with hexagon socket ISO 14585, A2 stainless steel, shape C (with tip)
Tallinn 3-in-1 parka
Jogger S1P safety shoes
Protective glove, synthetic
Disposable breathing mask