Fabric sanding belt VSM KK718X
Cloth-backed sanding belt corundum VSM KK718X
SNDBL-CLTH-VSM-KK718X-150X2500MM-K240
Register now and access more than 125,000 products
KK718X is ideal for grinding tubes and rods in the centreless process or wire finish on planetary grinding machines; at medium to high contact pressure. The long-term abrasive also boasts a uniform grinding finish and uniform surface roughness over the entire, very long service life when sanding flat steel in a continuous process.
- Reduced sanding costs due to lower tool consumption and fewer tool changes
- For uniform workpiece surfaces and roughness depths with constant removal
- Abrasive additives in the second layer of cover bonding ensure higher removal
Datasheets(X)
Width x length | 150 mm x 2500 mm |
Grid size | 240 |
Material of abrasive medium | Aluminium oxide |
Backing material | X-polyester |
Last viewed
Twist drill bit HSS DIN 1897 type RN
Hexagonal nut, low profile ISO 4035 steel FK05, zinc flake silver (ZFSHL)
MS 5000 function key For locks and rotary knobs
Saddle washer for trapezoidal profile
Spacer sleeve Hexagon, zinc-plated steel
Oval escutcheon blind
SCHIMOS 80/120-H front panel profile for wooden doors
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Straight male fitting ISO 8434-1, stainless steel 1.4571, tapered BSPT male thread
Data and charging cable USB-C/USB-C