Fabric sanding belt VSM KK718X
Cloth-backed sanding belt corundum VSM KK718X
SNDBL-CLTH-VSM-KK718X-150X2500MM-K400
Register now and access more than 125,000 products
KK718X is ideal for grinding tubes and rods in the centreless process or wire finish on planetary grinding machines; at medium to high contact pressure. The long-term abrasive also boasts a uniform grinding finish and uniform surface roughness over the entire, very long service life when sanding flat steel in a continuous process.
- Reduced sanding costs due to lower tool consumption and fewer tool changes
- For uniform workpiece surfaces and roughness depths with constant removal
- Abrasive additives in the second layer of cover bonding ensure higher removal
Width x length | 150 mm x 2500 mm |
Grid size | 400 |
Material of abrasive medium | Aluminium oxide |
Backing material | X-polyester |
Datasheets(X)
Last viewed
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, zinc flake silver (ZFSHL)
Crimp cable lug, push connector PVC-insulated
Low-cut safety shoes S1P Carbon 290 ESD
Combination fire protection putty
Cut protection glove
FH 61 panic mortise lock
Wire cup brush Steel, crimped, with shank
Self-tapping thread insert with cutting slot
Shim ring DIN 988, steel, plain
Pre-charged NiMH high-capacity rechargeable battery Pre-charged
