Fiberthree F3 PA-GF30 Pro FFF printing material

• The glass fibres minimise shrinkage, which significantly reduces the risk of warping


• The material exhibits a very high level of strength with very low warping tendency and very good layer adhesion


• The good heat and media resistance make it suitable for all applications for high-strength, lightweight parts. Suitable for use in autoclaves up to 180 °C - non-conductive


• Rough, matt surface finish. Very rigid filament, which can break in the feed if bending radii are small


• The material differs from F3 PA-GF Pro in its increased stiffness

Advantages

• High-performance PA 6-based polyamide (modified)


• 30 % glass fibres by weight


• High strength - excellent pressure resistance


• Low warping


• Good adhesion to printbed


• Matt black finish

Application instructions

• The use of abrasion-resistant nozzles is strongly recommended


• The filament must be stored and printed in a dry environment for the best printing results


• A drying box and drying agent/desiccant are recommended