Filler Light filler

Name: Filler Light filler
Brand: Würth
SKU: 0892162250

Filler, light filler
FILR-GAP/JOINTFILLER-WHITE-5LTR

Art.-no. 0892162250

EAN 4052703416059

All versions

Specification

Light filler for filling joints, cracks and holes in wall and ceiling surfaces

Ready-to-use for fast application

Almost no shrinkage, which eliminates cracking

Easy to paint over with emulsion paints

Easy to sand with 200 μm grain content max. 1 %

Notice

Please note that these values merely serve as empirical values. It should therefore be noted that the hardening time increases with thicker joints. The spatula, type 4A, can also be processed according to EN 13963 without joint cover strip. Cleaning: With water

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

The light filler is suitable for filling joints, cracks and holes in walls and ceilings (e.g. gypsum plasterboard, acoustic panels). Small uneven areas in surfaces on walls can also be compensated, such as those that become visible when scraping off wallpaper. Can also be used in model construction.

Instructions

The base material must be clean, dry and free from dust and grease. Using a cartridge or spatula, apply and spread the light filler to the joint, crack or hole. With joints, the protruding joint compound can be cut away with a utility knife after approx. 15-20 minutes. For more information, please refer to the technical data sheet.

Technical information

Chemical basis	Acrylate dispersion
Density	0.57 g/cm³
Viscosity/consistency	Pasty
Min./max. processing temperature	5 to 30 °C
Min./max. curing time	6-8 h
Grain size	200 µm
Colour	White
Contents	5 l
Container	Bucket
Shelf life from production	12 Month
Conditions to maintain shelf life from production	at 5°C to 25°C
Max. temperature resistance of the hardened material	-15 °C
Min. curing time	6 h
Max. curing time	8 h
Curing time conditions	depending on layer thickness
Recoatable/Can be painted over	Yes, after 15-20 minutes