Filler VAKU 20

Name: Filler VAKU 20
Brand: Würth
SKU: 089260202

Filler, VAKU 20
FILR-FINE-(VAKU-20)-2000G

Art.-no. 089260202

EAN 4053479306407

All versions

Specification

Fine filler with high elasticity for sealing pores and for repairing small scratches, grooves and uneven surfaces

Finely matched filler and resin combinations

Non-porous and closed filling

Low dust build-up during sanding

Quick drying

Saves time as further processing can continue directly (sanding, filling and applying top coat)

Easy to sand

User friendly

Simplifies further processing of the object

Brilliant white pigmentation

Optimum surface and preparation for top-coat paint

Ideal for use in model and furniture construction

Temperature-resistant up to 80°C

Notice

Tip: Before the final coating, strip the repaired spot with 1-component or 2-component universal primer, HS filler or Rust Stop Quattro (to eliminate the risk of visible repair edges or gloss reduction) Maximum permissible VOC content of VAKU 20: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOCFarbV): 2 g/l

Polyester putty will not harden below +10°C.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Auto/cargo: For eliminating minor paint damage, scratches and for closing existing pores and uneven areas in the surfacing and universal filler area.

Metal: Extremely fine surface processing to ensure an optimum finish.

Wood: Suitable as a fine or universal filler for all types of wood. Not suitable for use on oily types of wood. Do not use on heavily weathered surfaces.

Instructions

The surface must be clean, dry and free from grease
Sand surfaces
Due to water sensitivity, polyester material should only be sanded when dry where possible. To prevent possible complaints, always ensure the correct dosing ratio between the filler and hardener.

Dosage: 2% hardener

Working life: 4-5 minutes at 20°C

Drying time: 20-30 minutes at 20°C

Sandpaper: P80-280, wet only once completely dry

Technical information

Contents	1.124 l
Smell/fragrance	Characteristic
Weight of content	1960 g
Conditions for VOC concentration	ChemVOCFarb
Chemical basis	Polyester resin
Colour	White
Hardener content	2 %
Density	1.744 g/cm³
Density conditions	at 20°C
Max. working life	5 min
Min. working life	4 min
Conditions for working life	at 20°C
Conditions for drying time	at 20°C
Min. drying time	20 min
Max. drying time	30 min
Max. temperature resistance of the hardened material	80 °C
Max. permissible VOC concentration	250 g/l
Max. VOC concentration	2 g/l
Shelf life from production	12 Month
Included in delivery	1960 g Vaku, 40 g hardener
Additional articles	Sandpaper Useit, art. no. 058130..., 058131..., 0581330...

Documents

Product information

Datasheets (2)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents (0)

Accessory

Additional accessory:

Product

Description

Quantity

Price
/PU

Dust binder cloth

DSTCLTH-80X50CM

Art.-no. 0899700001

For binding even the finest dust before painting work.

x 5 pcs

Vaku hardener (peroxide hardener)

HARD-FILR-VAKU-TUBE-40G

Art.-no. 0892600004

Putty hardener for our polyester putty VAKU 20–VAKU 80

x 1 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Sanding disc Useit Superpad vehicle

DSPAP-USEIT-P-CAR-P180-D50MM

ZEBRA

Art.-no. 0581300180

The perforated sanding disc for filler and filler compounds, HS top-coat paints and water-based paints, as well as plastics and composite fibre materials (e.g. GFRP).

x 25 pcs