Filler VAKU 40

Name: Filler VAKU 40
Brand: Würth
SKU: 089260402

Filler, VAKU 40
FILR-FILL-(VAKU-40)-1800G

Art.-no. 089260402

EAN 4047376147515

All versions

Specification

Filler for filling and levelling deep uneven surfaces and scratches

Specific weight reduced by 30%

Extremely easy to sand and minimal dust build-up

User-friendly

Quick drying

Ensures fast further processing that will save you time

High filling power and a high degree of stability under load

Heat-resistant up to 80°C

Notice

Maximum permissible VOC content of VAKU 40: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOCFarbV): 0 g/l

Roughly sand the surface depending on condition to achieve optimum adhesion.

Iron, steel, zinc: P40-P240

Aluminium: P150-P240

GFRP: P150-P240

Old paint: P150-P240

Polyester putty will not harden below +10°C.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Excellent adhesion to iron, steel, aluminium, zinc-plated and hot-dip zinc-plated surfaces, GFRP and wood Can be used on all material surfaces.

Auto/cargo: In vehicle construction and in vehicle repair work for deeply uneven surfaces and scratches as a basis for finishing with fine filler

Metal: As filler in prototype construction and for compensating blowholes and welding spots

Wood: Ideal as repair putty for use in the construction sector. For universal use on all types of wood. Ideally suited for wood restoration, and in window, door and prototype construction. Not suitable for use on oily types of wood.

Instructions

The application surface must be clean, dry and free from grease
Depending on the surface structure, surfaces should be coarsely sanded to achieve optimum adhesion.

Iron, steel and zinc: P40-P240

Aluminium: P150-P240

GFRP: P150-P240

Old paint: P150-P240

Wherever possible, only sand polyester material when dry due to its sensitivity to water.

To prevent possible complaints, always ensure the correct dosing ratio between filler and hardener

Dosage: 2% hardener

Working life: 4-5 minutes at 20°C

Drying time: 20-30 minutes at 20°C

Sandpaper: P80-280 Wet only once completely dry

Technical information

Weight of content	1760 g
Conditions for VOC concentration	ChemVOCFarb
Chemical basis	Polyester
Colour	Light beige
Hardener content	2 %
Density	1.592 g/cm³
Max. working life	5 min
Min. working life	4 min
Conditions for working life	at 20°C
Conditions for drying time	at 20°C
Min. drying time	20 min
Max. drying time	30 min
Max. temperature resistance of the hardened material	80 °C
Max. permissible VOC concentration	250 g/l
Max. VOC concentration	0 g/l
Shelf life from production	12 Month
Included in delivery	1760 g + 40 g hardener and plastic spatula

Documents

Product information

Datasheets (2)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents (0)

Delivery scope

Filler VAKU 40 including:

1 x

Vaku hardener (peroxide hardener)

HARD-FILR-VAKU-TUBE-40G

Art.-no. 0892600004

Description: Putty hardener for our polyester putty VAKU 20–VAKU 80

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).