Filler VAKU 60

Name: Filler VAKU 60
Brand: Würth
SKU: 089260602

Filler, VAKU 60
FILR-MET-(VAKU-60)-1800G

Art.-no. 089260602

EAN 4047376147553

All versions

Specification

Polyester resin-based TIN-Metallic filler with aluminium pigmentation for vehicle construction and vehicle repairs

High-quality filler

High-quality filler and resin combinations enable a non-porous, closed filling of recesses and uneven surfaces

Low dust build-up during sanding

For particularly stringent quality requirements

Aluminium pigmentation ensures an extremely high degree of strength in conjunction with metallic surfaces

Notice

Fillers are sensitive to excessively fast drying Caution! - Risk of cracking above 80°C
Particular caution should be exercised when using infra-red radiators
Maximum permissible VOC content of VAKU 60: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOCFarbV): 14 g/l

Polyester putty will not harden below +10°C.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application

Application area

Outstanding adhesion and stability

Ideally suited for use on vertical areas, e.g. in container construction, silo construction, vehicle construction, vehicle replacement parts etc.

Excellent adhesion to iron, steel, aluminium, zinc-plated and hot-dip zinc-plated surfaces

Tin-substitute filler

Can be used in accident repairs as a substitute for alluvial tin

Auto/cargo: In vehicle construction and vehicle repair work with outstanding adhesion to steel, aluminium, zinc and hot-dip zinc-plated surfaces. Ideally suited for use as tin substitute filler in replacement parts.

Metal: In machine and steel construction for compensating blowholes and welding spots. Optimum adhesion to steel, aluminium, zinc and hot-dip zinc-plated surfaces

Instructions

The surface must be clean, dry and free from grease. Sand surfaces.

Wherever possible, only sand polyester material when dry due to its sensitivity to water

Dosage: 2% hardener

Working life: 4-5 minutes at 20°C

Drying time: 20-30 minutes at 20°C

Sandpaper: P80-280 - Wet only once completely dry

Technical information

Contents	1282.1 ml
Smell/fragrance	Characteristic
Weight of content	1760 g
Conditions for VOC concentration	ChemVOCFarb
Chemical basis	Polyester resin
Colour	Anthracite, metallic
Hardener content	2 %
Density	1.404 g/cm³
Max. working life	5 min
Min. working life	4 min
Conditions for working life	at 20°C
Conditions for drying time	at 20°C
Min. drying time	20 min
Max. drying time	30 min
Max. temperature resistance of the hardened material	80 °C
Max. permissible VOC concentration	250 g/l
Max. VOC concentration	20 g/l
Shelf life from production	12 Month
Included in delivery	1760 g + 40 g hardener and plastic spatula

Documents

Product information

Datasheets (2)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents (0)

Delivery scope

Filler VAKU 60 including:

1 x

Vaku hardener (peroxide hardener)

HARD-FILR-VAKU-TUBE-40G

Art.-no. 0892600004

Description: Putty hardener for our polyester putty VAKU 20–VAKU 80

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).