Filler VAKU 70 - FILR-GF-(VAKU-70)-1800G

Filler VAKU 70

Name: Filler VAKU 70
Brand: Würth
SKU: 089260702

Filler, VAKU 70
FILR-GF-(VAKU-70)-1800G

Art.-no. 089260702

EAN 4047376168282

All versions

Similar products

Prices for customers after login

Filler VAKU 70

Art.-no. 089260702

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service:

Glass fibre reinforcement filler for bridging cracks, holes and for repairing glass fibre reinforced plastics.

Balanced proportion of glass fibres

Excellent application properties

User-friendly

Excellent adhesion and stability

Highly suitable for use on vertical surfaces

Superb adhesion to iron, steel, aluminium, galvanized and hot-dip galvanized surfaces.

Ideally suited as knifing filler after repairing GFRP parts with VAKU 80 repair resin.

Fast curing

For fast, time-saving further processing.

Maximum permissible VOC content of VAKU 70: 250 g/l of product category 2(b). Max. VOC content in accordance with German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV): 4 g/l.

Heat-resistant up to 80°C

Notice

Tip: Can be coated with VAKU 20, VAKU 30 and VAKU 40 filler without sanding in between coats. To prevent possible complaints, always ensure that the correct dosing ratio of filler to hardener is used.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet 1

Safety data sheet 2

Certificates/ Documents

Application area

Auto/cargo: In vehicle construction and vehicle repairs for levelling unevenness, cracks and holes. For repairing glass fibre reinforced plastics. Attachments on trucks and passenger cars.

Metal: In machines and steel construction for levelling out larger damaged areas. For repairing glass fibre reinforced plastics.

Instructions

The surface must be clean, dry and free from grease. Sand surfaces. Wherever possible, only sand polyester material when dry due to its sensitivity to water. See separate information on wet sanding.

Contents	1120.8 ml
Smell/fragrance	Characteristic
Weight of content	1760 g
Conditions for VOC concentration	ChemVOCFarb
Chemical basis	Polyester resin
Colour	Green
Hardener content	2 %
Density	1.606 g/cm³
Max. working life	5 min
Min. working life	4 min
Conditions for working life	at 20°C
Conditions for drying time	at 20°C
Min. drying time	20 min
Max. drying time	30 min
Max. temperature resistance of the hardened material	80 °C
Max. permissible VOC concentration	250 g/l
Max. VOC concentration	4 g/l
Shelf life from production	12 Month
Included in delivery	1760 g filler, 40 g hardener, plastic spatula
Additional articles	Sandpaper Useit, art. no.: 05813...

Filler VAKU 70 including:

1 x

Vaku hardener (peroxide hardener)

HARD-FILR-VAKU-TUBE-40G

Art.-no. 0892600004

Description: Putty hardener for our polyester putty VAKU 20–VAKU 80

Quantity: 1 x

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Additive article:

Product

Description

Quantity

Price
/PU

Silicone remover

SILREM-AEROSOLCAN-600ML

Art.-no. 0893222600

For professional cleaning and degreasing before applying adhesives or painting

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

Suitable glove:

Product

Description

Chemical protective glove, Butyl

Description:

Permeation level: 3

Gas-tight and resistant to exhaust gases produced by combustion processes

Chemical protective glove made from natural latex and chloroprene

Description:

Permeation level: 1

Cotton flocking on the inside

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.