Fire protection cable pipe starter set System B2
Fire protection cable pipes starter set 8 pcs
STARTER SET FIRE PROTECTION CABLE TUBE
Art.-no. 0988046088
EAN 4099618923203
Register now and access more than 125,000 products
Prefabricated set consisting of the system components or products for installing system B2 cable pipe penetration sealing
- Cable pipes in three different dimensions
- Ablative coating for cable pipes
- Installation set (approval and 2x name plates)
Further details and documentation on the system can be found at www.wuerth.de/brandschutz
Datasheets(X)
For cable penetration sealing in solid walls and ceilings and in lightweight partition walls. The cable pipes have a fire rating of 90 minutes (fire resistant).
For electrical cables (except for waveguide cables), fibre optic cable bundles of dia. ≤ 100 mm with individual cables of dia. ≤ 21 mm, electrical installation pipes of dia. ≤ 32 mm with and without cable assignment as well as PVC and PE pipes (U/U) of dia. ≤ 25 mm. 100 % of the cable pipe cross-section may be utilised.
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Tipp® VDS loop hanger for fastening sprinkler lines in fixed water-based fire extinguishing systems according to VdS guidelines
Pressure reducer
Interior trim clip, closed
GEFU® thread-rolling screw with Taptite 2000® thread, countersunk head with hexalobular drive
Hexagon head bolt With thin shaft in hygienic design
EPS profile thumbturn cylinder
piasta® drilling screw, hexagon head A2 stainless steel with drill tip and moulded thread made of hardened steel
Safety clamp gripper
STC end mill Speedtwister-Universal, long, optional, five cutting edges, uneven angle of twist gradient, 3xD
System bolt with expanding socket for system connector SV 20 E