Fire protection duct bracket, coated I30/I60/I90/I120
Fire protection bracket I30/I60/I90/I120
BRKT-FP-F.FPDCT-I-1000X50X30MM
Register now and access more than 125,000 products
- No propagation of fire in the duct; actively inhibits fire
- Low space requirements as virtually the entire duct cross-section is usable
- Fast, simple installation; easily mountable, self-closing components
- Dust-free installation
- Simple fastening, even directly on ceilings or walls
- Easily accessible, therefore maintenance-friendly; easy and simple to add to installation at a later stage
- Cable versions available with metal or plastic cable fittings in accordance with EN 60 423
- Dimensionally stable
- Special designs also deliverable via special order: Two-sided, three-sided, four-sided, round duct, stainless steel duct, surfaces in RAL colours
- Interior coating begins to react at +200°C
- Low tare weight
- Where cables and pipes are placed directly on the element, the permissible total weight resulting from cable and pipe weight ≤ 34 kg/m.
- Store dry and frost-free
- General technical approval Z-19.30-2214
- Fire resistance duration I 30 to I 120
Datasheets(X)
For use in system E4
Fire protection duct I 30/I 60/I 90/I 120 for encapsulation of combustibles
- Escape and rescue routes, as well as in essential corridors and stairwells
- Suitable for cables, flammable pipes and non-flammable pipes with flammable synthetic rubber insulation
- The I-duct can be routed through fire-resistant solid and lightweight partition walls
- Duct itself can act as a cable conduit
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-09-011
Width x height | 50 x 30 mm |
Length | 1000 mm |
Fire resistance rating | I120 |
Surface | Zinc plated |
Colour | Silver grey |
Material | Steel / steel |
Last viewed
Paint spray, special
Hexagon nut, low profile with fine thread ISO 8675, steel 04, zinc-nickel silver
Hexagonal nut
Hexagonal bolt, fully threaded, SB fittings, DIN EN 15048-1 ISO 4017, A2-70 stainless steel, plain, with nut ISO 4032
Twist drill bit, metal Ruko DIN 338 HSS-G TiAlN
Screw-fit OPTIMUS shelf support With flat support
Hexagonal bolt with shank DIN 931, steel 5.6, zinc-plated, blue passivated (A2K)
Mechanical manual crimping pliers WK 22 For replaceable half-shell crimping inserts, width 22 mm
Socket contact 1.5
Water pump pliers DIN ISO 8976