Fire protection duct inner corner I30/I60/I90/I120
Fire protection inner corner I30/I60/I90/I120
INCRN-FP-F.FPDCT-I-40X40MM
Register now and access more than 125,000 products
- No propagation of fire in the duct; actively inhibits fire
- Low space requirements as virtually the entire duct cross-section is usable
- Fast, simple installation; easily mountable, self-closing components
- Dust-free installation
- Simple fastening, even directly on ceilings or walls
- Easily accessible, therefore maintenance-friendly; easy and simple to add to installation at a later stage
- Cable versions available with metal or plastic cable fittings in accordance with EN 60 423
- Dimensionally stable
- Special designs also deliverable via special order: Two-sided, three-sided, four-sided, round duct, stainless steel duct, surfaces in RAL colours
- Interior coating begins to react at +200°C
- Low tare weight
- Where cables and pipes are placed directly on the element, the permissible total weight resulting from cable and pipe weight ≤ 34 kg/m.
- Store dry and frost-free
- General technical approval Z-19.30-2214
- Fire resistance duration I 30 to I 120
Datasheets(X)
For use in system E4
Fire protection duct I 30/I 60/I 90/I 120 for encapsulation of combustibles
- Escape and rescue routes, as well as in essential corridors and stairwells
- Suitable for cables, flammable pipes and non-flammable pipes with flammable synthetic rubber insulation
- The I-duct can be routed through fire-resistant solid and lightweight partition walls
- Duct itself can act as a cable conduit
The installation instructions and general type approval Z-19.30-2214 must be strictly observed when installing the fire protection duct.
Width x height | 40 x 40 mm |
Fire resistance rating | I120 |
Angle | 90 Degree |
Surface | Zinc plated |
Colour | White |
Material | Steel / steel |
Last viewed
Jacket Planam Plaline
Heavy-duty castor with rotating holder
GPN 300 V sealing plug Polyethylene (PE-LD), natural
Plastic washer For round eyelet
Segmented construction site diamond cutting disc
Hexagon Socket Head Cap Screw
Blind rivet, flat head with grooved shank
Braking hinge set For wooden frame
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Sanding belt, wide VSM KK718X