Fire protection duct wall connection collar I30/I60/I90/I120
Wall connection collar I30/I60/I90/I120
WLCONCOLAR-F.FPDCT-I-400X120MM
Register now and access more than 125,000 products
- No propagation of fire in the duct; actively inhibits fire
- Low space requirements as virtually the entire duct cross-section is usable
- Fast, simple installation; easily mountable, self-closing components
- Dust-free installation
- Simple fastening, even directly on ceilings or walls
- Easily accessible, therefore maintenance-friendly; easy and simple to add to installation at a later stage
- Cable versions available with metal or plastic cable fittings in accordance with EN 60 423
- Dimensionally stable
- Interior coating begins to react at +200°C
- Low tare weight
Special designs also deliverable via special order:
Two-sided, three-sided, four-sided, round duct, stainless steel duct, surfaces in RAL colours
- Where cables and pipes are placed directly on the element, the permissible total weight resulting from cable and pipe weight ≤ 34 kg/m.
- Store dry and frost-free
- General technical approval Z-19.30-2214
- Fire resistance duration I 30 to I 120
Datasheets(X)
For use in system E4
Fire protection duct I 30/I 60/I 90/I 120 for encapsulation of combustibles
- Escape and rescue routes, as well as in essential corridors and stairwells
- Suitable for cables, flammable pipes and non-flammable pipes with flammable synthetic rubber insulation
- The I-duct can be routed through fire-resistant solid and lightweight partition walls
- Duct itself can act as a cable conduit
When installing the fire protection duct, observe the installation instructions and test certificate no. P-MPA-E-09-011
Width x height | 400 x 120 mm |
Length | 30 mm |
Fire resistance rating | I120 |
Surface | Zinc plated |
Material | Steel / steel |
Last viewed
RW® bit
Identification rings, PVC
ASME B18.8.2 steel plain
Cordless angle grinder AWS 18-125 P COMPACT M-CUBE
Solid carbide end mill With Speedcut Universal corner radius, extra-long XXL, optional, four cutting edges, uneven angle of twist gradient
1/2-inch socket wrench insert, TX head For external TX screws, short
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
Hose clamp SS2298, W1
Mini solid carbide single-tooth cutter, aluminium
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, steel 10.9, plain