Fire-retardant mortar
Fire protection mortar
FPMORT-10KG
Register now and access more than 125,000 products
- High yield
- Good stability - therefore lower formwork effort
- Does not cause corrosion on concrete steel reinforcements
- Has a neutral effect on PVC cables
- Suitable for pumping and for manual application
- Resistant to ageing
- Very good surface adhesion to steel, concrete, masonry
- Wall and ceiling ducts, fire-resistant 120 minutes Z-19.53-2298
- Wall and ceiling openings, fire-resistant Z-19.53-2499
Datasheets(X)
For processing in the system [A] + [B] + [G2] + [H] + [B2] + [F] + [F2] + [G3] + [H1] + [H2] + [H3]
- Combination partition [A]
- Fire partition M[B]
- Pipe partition dB [G2]
- Pipe partition Z [H]
- For sealing wall and ceiling ducts with a fire resistance rating of fire-resistant and S 120 in accordance with DIN 4102, part 9, for cables, cable bundles, cable support systems and combination partitions
- The sealing allows all kinds of electrical cables and wires (including fibre optic cables), cable bundles, cable support systems, single waveguides, single wires for control purposes, electrical installation pipes, flammable and non-flammable pipes to be used. Special applications such as hydraulic hoses, double solar tubes, air-conditioning split lines, vacuum lines, pneumatic lines and gas lines are possible.
- Add approximately 6 litres of water to a 20 kg bag, approximately 3 litres of water to a 10 kg bucket
- 20 kg of dry mortar gives about 20 L of wet mortar
Weight of content | 10 kg |
Container | Bucket |
Fire resistance rating | Fire resistance of 120 minutes |
Colour | Grey |
Mixing ratio | 3 l water for 10 kg |
Max. processing time | 60 min |
Shelf life from production | 12 Month |
Min. processing temperature | 5 °C |
Conditions to maintain shelf life from production | cool and dry storage area |
Viscosity/consistency | Powder |
Max. moulded density | 1.06 kg/dm³ |
Min. moulded density | 1.04 kg/dm³ |
Min. compressive strength | 2.5 N/mm² |
Min. flexural strength | 0.8 N/mm² |
Max. flexural strength | 1.5 N/mm² |
Chemical basis | Cement and mineral additives |
Max. compressive strength | 5 N/mm² |
Smell/fragrance | Odourless |
DIN | 4102-9 |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!