Fitting Brass, 10010
Threaded socket w/ hexagon a. male thread 10010
PLG-THR-ET-BRS-WS14-G1/4X8MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/4 |
Length (a) | 39 mm |
Length 2 (b) | 25 mm |
Internal diameter (d) | 6 mm |
Connection-piece diameter (D) | 9.5 mm |
Height (h) | 9 mm |
Width across flats (S/S1) | 14 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Wooden shaft, conical With ground cone and rounded shaft end
High-visibility vest Neon
Countersunk head screw with hexagon socket, full thread
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
Delineator
Stud with threaded end ≈ 1.25 d DIN 939, A4 stainless steel, plain
Overshoe
Cover cap for screws with head recess
Label window
EUROFAST® aerated concrete screw GBS-8
