Fitting Brass, 10011
Threaded socket w. hexagon a. female thread 10011
PLG-THR-IT-BRS-WS15-G1/4X6MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/4 |
Length (a) | 36 mm |
Length 2 (b) | 25 mm |
Internal diameter (d) | 4.5 mm |
Connection-piece diameter (D) | 7.5 mm |
Width across flats (S/S1) | 15 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Stud with threaded end ≈ 1.25 d DIN 939, steel 5.8, plain
Slotted cheese head DIN 84, steel 4.8, zinc-plated, blue passivated (A2K)
Hexagonal bolt with thread up to the head
Hexagonal bolt with thread up to the head
Taper-grooved dowel pin DIN 1472, A1 stainless steel, plain
Trousers Stretch X
Flat nut with small width across flats, fine thread
Slotted countersunk head screw DIN 963, 4.8 steel, plain
Cable gland, polyamide Metric according to EN 60423/EN 62444
System workbench 2000 mm with 2 fixed workbench feet and drawer wall-mounted cabinet 8.6