Fitting Brass, 10107
Threaded hose nozzle heavy-duty design 10107
PLG-HOSE-HDUT-BRS-G1/2X10MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/2 |
Length (a) | 37 mm |
Length 2 (b) | 22 mm |
Internal diameter (d) | 8 mm |
Connection-piece diameter (D) | 11.5 mm |
Height (h) | 12 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
SNAP marker
Magno padlock
Plug-in connector, wood/wood
Tool head, large design For crimping pliers
Assembly tool For running gear
Mottling point Klingspor SFM 656
Clamping pin/clamping sleeve
Y-shaped distributor
Adjustable straight sealing cone male fitting ISO 8434-1, zinc-nickel-plated steel, BSPP male thread with o-ring
C 6.3 TX bit (1/4 inch)
