Fitting Brass, 10107
Threaded hose nozzle heavy-duty design 10107
PLG-HOSE-HDUT-BRS-G1X13MM
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1 |
Length (a) | 45 mm |
Length 2 (b) | 30 mm |
Internal diameter (d) | 10 mm |
Connection-piece diameter (D) | 14.5 mm |
Height (h) | 12 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Order protector with rip-tape fastening
GEFU® thread-rolling screw With Taptite 2000® thread, countersunk head and hexalobular drive
TX bit with hole
Small paint roller
Folding trolley
Welded stud
Round head screw with square neck and nut DIN 603, steel 4.8, plain, with nut
Half round head safety screw with hexagon socket and pin Similar to ISO 7380-1, A2-070 stainless steel, plain
Twist drill bit HSCO DIN 338 SMART STEP
Cordless screwdriver S 3-A