Fitting Brass, 15007
Pipe reducer with male and female thread 15007
REDR-PCE-ET-IT-BRS-G1XG3/8
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1 |
Thread type 2 x nominal diameter 2 (G2) | G3/8 |
Length (a) | 21 mm |
Length 2 (b) | 14 mm |
Width across flats (S/S1) | 34 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Cable ties with plastic latch closure – industrial quality
Clamping pin/clamping sleeve
Ice scraper with handle, Hobby With stable edge for effortless removal of ice
AirKey battery replacement set
Hexagonal bolt with shank ISO 4014, steel 10.9, plain
Nature trousers
Ducting clamp Part 1 – Light series
Work T-shirt Hakro 292
Clamping pin/clamping sleeve, slotted, heavy-duty design ISO 8752 spring steel plain
Hexagonal bolt with shank
