Fitting Brass, 15056
Sleeve 15056
SLEV-IT-BRS-G1/2
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/2 |
Length (a) | 27 mm |
Outer diameter (A) | 27 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
WE system workshop trolley
Cheese head screw with hexagon socket head and shoulder ISO 7379, steel 12.9, plain, tolerance f9
Solder cable lug DIN 46211
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Cylindrical pin, unhardened DIN 7, A4 stainless steel, plain
Universal strut bearing adapter for Maximus spring compressor
Hexagon head bolt with shank for pressure container construction (PED) ISO 4014, steel 25CrMo4, plain
1/2 inch socket wrench insert metric, hexagon, long
Tapered pin, unhardened DIN 1, A1 stainless steel, plain
1/2 inch socket wrench insert metric, hexagon, long