Fitting Brass, 15056
Sleeve 15056
SLEV-IT-BRS-G1/8
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/8 |
Length (a) | 16 mm |
Outer diameter (A) | 14 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Tapered pin with female thread, unhardened DIN 7978, plain steel, unhardened
2C epoxy primer
Work dungarees
Half face mask Moldex 5120 FFA1P2
Socket wrench, hexagon, 3/4 inch Assortment of 15 pieces
Protective apron
Soft wax
Hexagonal bolt
Object hinge OBX 18-9397/160
Knife accessories Martor safety wrench Easysafe 9890.74