Fitting Brass, 15056
Sleeve 15056
SLEV-IT-BRS-G3/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G3/4 |
Length (a) | 30 mm |
Outer diameter (A) | 32 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Countersunk head screw with hexagon socket ISO 10642, steel 8.8, zinc-plated, thick-film passivated (ZSML)
Hexagonal bolt with shank DIN 601/ISO 4016, steel 4.8, zinc-plated, blue passivated (A2K), with nut
Countersunk head screw with hexagon socket ISO 10642, A4-070 stainless steel, plain
FH 19 mortise lock
Square solid spindle 8 mm
W.TEC® INSERT COIL helical insert screw-in tool - manual installation tool
Slotted raised countersunk head screw DIN 964, steel 4.8, zinc-plated, blue passivated (A2K)
Countersunk head screw with H cross recess ISO 7046-2, A2-70 stainless steel, plain
Screw, hexagon head with shaft
Hexagonal bolt with thread up to the head ISO 4017, A5 1.4571 stainless steel, plain