Fitting Brass, 15056
Sleeve reduced 15056
SLEV-REDR-IT-BRS-G3/8XG1/8
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G3/8 |
Thread type 2 x nominal diameter 2 (G2) | G1/8 |
Length (a) | 23 mm |
Length 2 (b) | 12 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Parquet ladder shoe set For wooden standing ladders (version from September 2020) and hybrid ladders
Safety boots, S3
Hexagonal bolt with thread up to head for pressure container construction DIN 933, A2 stainless steel, plain
1/4" socket wrench insert metric, long
SC short twist drill bit DIN 6539
Steel enclosed tape measure With 3:1 crank ratio for retracting the tape three times faster
STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
Connection line Made of plastic, for LED-T-12-5 LED transformer
Tapered pin, unhardened DIN 1, plain steel, unhardened, design A (ground)
Brother label tape cassette for labellers