Fitting Brass, 15066
Elbow 45° with female/male thread 15066
ANGL-45GRAD-IT-ET-BRS-G1/2
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1/2 |
Thread type 2 x nominal diameter 2 (G2) | G1/2 |
Length (a) | 22 mm |
Length 2 (b) | 22 mm |
Length 3 (c) | 12 mm |
Length 4 (Z/Za) | 14 mm |
Internal diameter (d) | 14 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Metal core drill bit Ruko solid carbide Tecrona thread holder
Work poloshirt JN020 Men's Polo-Piqué Medium
Hexagonal bolt with shank
Wet sanding paper, sheets Wet sanding paper, sheets
Blanking grommet Made from neoprene
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Manual screw tap, third tap Ruko hand tap HSS DIN 5157 cylindrical pipe thread third tap
Cylindrical pin with female thread DIN 7979, steel plain, hardened, tolerance class m6
GEFU® thread-rolling screw With Taptite 2000® thread, flat head and hexalobular drive
Dust extraction drill bit Plus D