Fitting Brass, 16001
Double nipple 16001
DBNPL-ET-BRS-G3/8
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G3/8 |
Thread type 2 x nominal diameter 2 (G2) | G3/8 |
Length (a) | 22 mm |
Length 2 (b) | 9 mm |
Length 3 (c) | 9 mm |
Internal diameter (d) | 10 mm |
Width across flats (S/S1) | 17 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Lock washer For cheese head screws DIN 7980, plain steel
Low-cut safety shoes, S3
Slotted countersunk head screw DIN 963, steel 4.8, nickel-plated (E2J)
Hexagon socket set screw with truncated cone ISO 4026 steel 45H, plain
Low-cut safety shoes, S3
Self-tapping screw
VDE 1/2 inch insulated socket wrench Metric, hexagon, short
pias® drilling screw, raised countersunk head with H recessed head
Safety boots, S2
Hexagon bolt with shank