Fitting Brass, 16002
Double nipple reduced 16002
DBNPL-REDR-ET-BRS-G1 1/2XG1 1/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1-1/2 |
Thread type 2 x nominal diameter 2 (G2) | G1-1/4 |
Length (a) | 41 mm |
Length 2 (b) | 18 mm |
Length 3 (c) | 15 mm |
Internal diameter (d) | 33 mm |
Width across flats (S/S1) | 50 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Grooved cylindrical pin with chamfer ISO 8740, A1 stainless steel
A2 stainless steel cross handle with male thread, blasted
Locking system DUAL
Work jacket
Hexagon head bolt With thread up to head, structural bolting assembly, DIN EN 15048-1
Engine cleaner
Hexagonal bolt with thread up to the head ISO 4017, steel 10.9, zinc-plated, blue passivated (A2K)
AL 420 drive handle
STAMCOLL AS adhesive and sealant For bonding Stamisol overlaps and connecting to roofs and façades
Wooden shaft, conical With ground cone and rounded shaft end