Fitting Brass, 16002
Double nipple reduced 16002
DBNPL-REDR-ET-BRS-G1 1/4XG3/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1-1/4 |
Thread type 2 x nominal diameter 2 (G2) | G3/4 |
Length (a) | 32 mm |
Length 2 (b) | 14.5 mm |
Length 3 (c) | 10 mm |
Internal diameter (d) | 19 mm |
Width across flats (S/S1) | 42 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Cylindrical pins with female thread, hardened ISO 8735, steel, plain, type A, hardened (with chamfer and taper)
Hexagonal bolt with shank
Tungsten carbide bur with MZ teeth
Hexagonal nut, flat profile DIN 936, steel, plain
Drawer divider set, BASIC US/USK, 8 pieces
Mounting set For tubular frame fittings on a long plate
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Storage and transport rack
Hexagon Socket Head Cap Screw
Brass brazing solder no. 95 F