Fitting Brass, 16002
Double nipple reduced 16002
DBNPL-REDR-ET-BRS-G1 3/4XG1 1/2
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
Datasheets(X)
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1-3/4 |
Thread type 2 x nominal diameter 2 (G2) | G1-1/2 |
Length (a) | 47 mm |
Length 2 (b) | 21 mm |
Length 3 (c) | 18 mm |
Internal diameter (d) | 39 mm |
Width across flats (S/S1) | 55 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Last viewed
Locking system, DPS
Hexagon Socket Head Cap Screw ISO 4762/DIN 912, A2-70 stainless steel
Feather key, high profile DIN 6885, steel C 45 K, plain, shape A
Low-cut safety shoes, S3
Hexagonal bolt with flange
EPS profile double cylinder
3KS Plus profile thumbturn cylinder For keyed alike profile cylinders in original equipment
VDE 3/8 inch socket wrench, metric, hexagon, short
Divider assortment With compartment rails and compartment dividers for system dimensions 12.8
L-shaped push-in fitting with female thread