Fitting Brass, 16002
Double nipple reduced 16002
DBNPL-REDR-ET-BRS-G1XG3/4
Register now and access more than 125,000 products
Compliance with drinking water ordinance
- According to the assessment basis of the Federal Environment Agency
- of elastomer guidelines
- of DVGW worksheet W 270
All threads in line with EN ISO 228
- Cylindrical G thread also called Whitworth thread (CLT)
- Defined length of thread engagement including after repeated assembly
- Can be fully screwed in
- Metallic sealing edge, bonding or soft seal
High load on the material possible
- Pressure range up to PN 25 bar possible
REACH art. 33 (1): Article contains SVHC substance lead (CAS. no. 7439-92-1) in a concentration of > 0.1 % by weight
- Hydraulics
- Pneumatics
- Mechanical engineering
- Water treatment
- Landscaping and gardening
- Sanitary, heating and air conditioning technology
- Foodstuffs industry
 | |
Thread type x nominal diameter (G) | G1 |
Thread type 2 x nominal diameter 2 (G2) | G3/4 |
Length (a) | 29 mm |
Length 2 (b) | 13 mm |
Length 3 (c) | 10 mm |
Internal diameter (d) | 19 mm |
Width across flats (S/S1) | 34 mm |
Material | Brass CW617N |
Surface | Plain |
Min./max. temperature conditions | -20 to 150 °C |
Nominal pressure PN | 25 |
Thread type | Pipe thread |
Datasheets (0)
Certificates/ Documents (0)
Last viewed
Retrofit set For height adjustment of the workbench
Threaded fitting
Flat washer with chamfer
Hexagonal bolt with thread up to head for pressure container construction DIN EN ISO 4017, A2 stainless steel
Tool head, small design For crimping pliers
Straight screw fitting, metal thread, metric PA6 MOD BS SGA
EPDM sealing tape, internal
Brass brazing solder no. 95 F
O-ring, metric
Waist jacket
